Liebherr IRe 4520 Plus installation instructions

Contents

1. 1 General safety instructionsp. 2
2. 2 Installation conditionsp. 2
3. 2.1 Locationp. 2
4. 2.2 Installing multiple appliancesp. 2
5. 2.3 Mains connectionp. 3

   WARNING Risk of fire due to short circuit! If the mains cable/connector of the appliance or of another appliance touch the rear of the appliance, the mains…

6. 3 Appliance dimensionsp. 3
7. 4 Recess dimensionsp. 4

   4.1 Internal dimensions Fig. 3 * M1): Only for IRBdi 5180/5190, ICNdi 5173, ICBNd/i 5163/73/83, ICBdi 5182* F (mm)* G (mm)* H (mm)* J (mm)* L (mm)* IR/f/e/d/…

8. 4.1 Internal dimensionsp. 4

   Fig. 3 * M1): Only for IRBdi 5180/5190, ICNdi 5173, ICBNd/i 5163/73/83, ICBdi 5182* F (mm)* G (mm)* H (mm)* J (mm)* L (mm)* IR/f/e/d/ c39.. SIBc39../ IK…

9. 5 Ventilation requirementsp. 4

   WARNING Blocked ventilation openings pose a risk of fire and damage! u Always keep the ventilation openings clear. Always ensure that the appliance is properly…

10. 6 Transporting the appliancep. 5

    u Transport the appliance only in suitable packaging. u Transport the appliance upright. u Do not transport the appliance on your own

11. 7 Unpacking the appliancep. 5

    Before you connect the appliance, report any damage immediately to the delivery company. u Check the appliance and the packaging for damage during transport.…

12. 8 Setting up the appliancep. 5

    CAUTION Risk of injury! u The appliance must be transported to its place of installation by two people. WARNING Risk of tipping u The appliance must be fixed…

13. 8.1 After installationp. 5

    u Remove all transport safety components. Fig. 4 u Remove the red transport safety device. u Clean the appliance (see User Guide, Cleaning the appliance)

14. 9 Disposing of packagingp. 5

    WARNING Danger of suffocation due to packing material and plastic film! u Do not allow children to play with packing material. The packaging is made of…

15. 10 What the symbols meanp. 5

    Risk of injury here! Follow the safety notes! These instructions apply to a range of models. Follow this step only if it applies to your appliance. To install…

16. 11 Reversing the doorp. 6

    Tool Fig. 5 Fig. 6 u Follow the steps in order. Fig. 7 u Removing the soft stop damper: Remove the soft stop damper from the ball stud (1). Unscrew the…

17. 12 Water connection*p. 8

    WARNING Electricity in combination with water! Electric shock. u Before connecting to the water pipe: Disconnect the appliance from the mains. u Before…

18. 13 Connecting the water supplyp. 9

    Connecting the hose to the appliance The solenoid valve is at the bottom on the back of the appliance. It has a R3/4 connecting thread. Fig. 21 Fig. 22 u Hold…

19. 14 Installing the appliance in the recessp. 9

    Tool Connecting the water supply * Depending on model and options 9

20. 15 Cabinet frontsp. 16

    15.1 Dimensions Depending on your model, you will need one or two cabinet doors. The size of the cabinet door(s) depends on the overall recess size and cabinet…

21. 15.1 Dimensionsp. 16

    Depending on your model, you will need one or two cabinet doors. The size of the cabinet door(s) depends on the overall recess size and cabinet unit thickness.…

22. 15.2 Mounting the cabinet front(s)p. 17

    When installing, note: - Cabinet front must be installed symmetrically to the refrigerator door. - Adjoining cabinet front is exactly level. - Adjoining…

23. 15.3 Setting the clearance to avoid collisionp. 17

    ) . Weight and hinges: - Heavy cabinet fronts increase the stress on the hinge. The hinge may be damaged. As such, refer to the catalogue for the maximum…

24. 16 Connecting the appliancep. 18

    WARNING Failure to connect properly Fire hazard. u Do not use an extension cable. u Do not use distributor blocks. NOTICE Failure to connect properly Damage to…

Other documents for this model

• Liebherr IRe 4520 Plus user manual