APC Easy UPS 3S 15 kVA 400 V 3:1 UPS for internal batteries (E3SUPS15K3IB) user manual

Contents

1. Important Safety Instructions — SAVE THESE INSTRUCTIONSp. 5

   10–40 kVA Important Safety Instructions — SAVE THESE INSTRUCTIONS Read these instructions carefully and look at the equipment to become familiar with it before…

2. Overviewp. 7

   10–40 kVA Overview User Interface Keys Home Previous Next Confirm EPO Only use the EPO button in case of emergency. When the EPO button is pushed, the system…

3. Operation Modesp. 17

   10–40 kVA Operation Modes Normal Mode The UPS provides power to the connected load from mains. The UPS converts mains to conditioned power for the connected…

4. Operation Proceduresp. 21

   10–40 kVA Operation Procedures Initial Start-Up of the UPS Using the Wizard – Only Applicable to Single UPSs with Internal Batteries DANGER HAZARD OF ELECTRIC…

5. Configurationp. 32

   Register Your Easy UPS 3S NOTE: The single Easy UPS 3S can also be registered using the mySchneider app which can be downloaded from App Store and Google Play.…

6. Testsp. 38

   Perform a Battery Maintenance Test Prerequisite: • The bypass supply must be within specifications. • The battery capacity must be above 25%. The battery…

7. Maintenancep. 39

   10–40 kVA Maintenance Parts Replacement Determine if you need a Replacement Part To determine if you need a replacement part, contact Schneider Electric and…

8. Troubleshootingp. 42

   View the Active Alarms 1. On the display select . See Status and Alarm Messages, page 42 for a list of alarm messages and corrective actions. 2. Use and to go…