LG 70UM7100PLA installation instructions

(Depending on model) Access Installation menu for commercial feature settings.

The abundant functions linked with software installation can be projected on OSD as ‘Installation Menu’.  The wide range of hotel features can be performed…

When ‘LG Hotel Mode Setup’ is set to On, all functions of Hotel Mode apply. Power On Status • Decide to select working status when the main power is turned on.…

(Depending on model) MAC Address • Displays the MAC address (not customizable). Network Settings One-click network connection (Depending on model) • Connects…

(Depending on model) Server Type (Depending on model) • You can set to ‘Standard Pro:Centric Server’, ‘Installation Code Server’. Installation Code Server Type…

Configuration Setup Select RCU • It is a mode to set whether to use Select RCU or not. When set to ‘Enable’, You can adjust ‘Number of RCU’ menu. Number of RCU…

(Depending on model) Portal Mode (Depending on model) • You can select 'Default Portal' (Use webOS default portal), 'Customizable Portal' (Use editable…

(Depending on model) Smart Share (Depending on model) • Smart Share enables DLNA function. If this value is enabled, the device acts as Media Player and…

(Depending on model) Resolution • You can set the resolution. Display On Time Setup • Device will send command set to display monitor after delay time(seconds)…

You can update files from a USB memory device to the device through the TV manager. Diagnostics (Depending on model) • Sets Enable or Disable. When it is set…

Image shown may differ from your device. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control…

Baud rate: 9,600 bps (UART) • Data length: 8 bits • Parity : None • Stop bit: 1 bit • Communication code: ASCII code • Use a crossed (reverse) cable

Suitable / Not Recommend remote-controller data format Item Formats Suitable data format NEC, RC5, Toshiba Not recommend data format Continuous data format…

(Depending on model) Command1 Command2 Data (Hexadecimal) 1 Power k a 00 to 01 2 Aspect Ratio k c (See p. 68) 3 Screen Mute k d (See p. 69) 4 Volume Mute k e…

(Depending on Model) Transmission (Command1)(Command2)( )(Set ID)( )(Data)(Cr) (Command1) : First command to control the device. (j, k, m or x) (Command2) …