APC Smart-UPS Li-ion SMTL2200RMI2UC user manual

Contents

1. Important Safety Instructionsp. 3

   SAVE THESE INSTRUCTIONS - This manual contains important instructions that should be followed during installation and maintenance of the UPS and batteries.…

2. Product Handling Guidelinesp. 3

   DANGER DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING WARNING indicates a hazardous situation…

3. Safety and General Informationp. 4

   Inspect the package contents upon receipt. Notify the carrier and dealer if there is any damage. • Adhere to all national and local electrical codes. • All…

4. Specificationsp. 6

   For additional specifications, refer to the APC Web site at www.apc.com. Environmental specifications SMT750RM2UC, SMT750RM2UCNC, and SMT750RMI2UC Rack-Mount…

5. Product Overviewp. 7
6. Installationp. 12

   For UPS installation information, refer to the Installation Guide included with the UPS. The Installation Guide is also available on the APC by Schneider…

7. Start up Settingsp. 15

   When the UPS is powered on for the first time the display interface displays the Setup Wizard to configure the start up settings. Configuration can also be…

8. Operationp. 16

   Using the display These Smart-UPS models are equipped with an intuitive and configurable LCD display. This display complements the software interface as they…

9. Configurationp. 19

   General configuration settings Configuration settings may be changed at any time using the LCD interface or PowerChute software. Setting Factory Default…

10. SmartConnectp. 24

    Ethernet Port allows you to monitor the health and status of your UPS from any device connected to the Internet. Availability of features varies by terms of…

11. EcoStruxure™ IT SmartConnectp. 24

    ” below for details. EcoStruxure™ IT SmartConnect The Web Portal allows you to remotely view the status of your UPS, receive automatic notifications about UPS…

12. Emergency Power Offp. 24

    Overview The Emergency Power Off (EPO) option is a feature that will immediately shut off power to all connected equipment. When the EPO button is pushed, all…

13. Battery Replacementp. 25

    Always recycle used batteries. For information on recycling a used battery, refer to the Battery Disposal Information sheet included with the replacement…

14. Troubleshootingp. 26

    Problem and Possible Cause Solution The UPS will not turn on or there is no output. The unit has not been turned on. Press the UPS ON/OFF key once to turn on…

15. Limited Factory Warrantyp. 27

    Schneider Electric IT Corporation (SEIT), warrants its products to be free from defects in materials and workmanship for a period of three (3) years excluding…

16. Transport the Unitp. 28

    1. Shut down and disconnect all connected equipment. 2. Disconnect the unit from utility power. 3. Disconnect all internal and external batteries (if…

17. Servicep. 28

    section of this manual. Service If the unit requires service, do not return it to the dealer. Follow these steps: 1. Review the Troubleshooting section of the…