APC E3SUPS10K3I user manual

Contents

1. Important Safety Instructions — SAVE THESE INSTRUCTIONSp. 5
2. Overviewp. 7

   10-40 kVA 400 V & 10-20 kVA 208 V 3:3,10-30 kVA 400 V 3:1 Overview User Interface Keys Home Previous Next Confirm EPO Only use the EPO button in case of…

3. Operation Modesp. 20

   Normal Mode The UPS provides power to the connected load from mains. The UPS converts mains to conditioned power for the connected load while recharging the…

4. Operation Proceduresp. 24

   Initial Start-Up of the UPS Using the Wizard – Only Applicable to Single UPSs with Internal Batteries DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH…

5. Configurationp. 35

   10-40 kVA 400 V & 10-20 kVA 208 V 3:3,10-30 kVA 400 V 3:1 Configuration Register Your Easy UPS 3S NOTE: The single Easy UPS 3S can also be registered using the…

6. Testsp. 45

   10-40 kVA 400 V & 10-20 kVA 208 V 3:3,10-30 kVA 400 V 3:1 Tests Perform a Battery Maintenance Test Prerequisite: • The bypass supply must be within…

7. Maintenancep. 46

   Parts Replacement Determine if you need a Replacement Part To determine if you need a replacement part, contact Schneider Electric and follow the procedure…

8. Troubleshootingp. 49

   10-40 kVA 400 V & 10-20 kVA 208 V 3:3,10-30 kVA 400 V 3:1 Troubleshooting View the Active Alarms 1. On the display select . See Status and Alarm Messages, page…