APC Installation (GVEBC7) user manual

Contents

1. Important Safety Instructions — SAVE THESE INSTRUCTIONSp. 5

   Read these instructions carefully and look at the equipment to become familiar with it before trying to install, operate, service or maintain it. The following…

2. Safety Precautionsp. 6

   DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH Read all instructions in the installation manual before installing or working on this product. Failure…

3. Specificationsp. 10

   NOTICE HAZARD OF EQUIPMENT DAMAGE Refer to the UPS installation manual for detailed specifications for the UPS system. Failure to follow these instructions can…

4. Battery Requirementsp. 10

   Battery type VRLA Minimum flammability rating HB Battery shelves 4 shelves sized 657 x 767 mm Maximum weight per shelf 300 kg Maximum weight per cabinet 1200…

5. Empty Battery Cabinet Weight and Dimensionsp. 10

   Weight kg Height mm Width mm Depth mm Empty battery cabinet 190 1970 700 850

6. Environmentp. 10
7. Installation Procedurep. 11
8. Position the Empty Battery Cabinetp. 11

   , page 11. 2. Prepare the empty battery cabinet for cables. Follow one of the procedures: – Prepare the Empty Battery Cabinet for Cables – Bottom Cable Entry…

9. Prepare the Empty Battery Cabinet for Cables – Bottom Cable Entryp. 13

   DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH Do not drill or punch holes with the gland plates installed and do not drill or punch holes in close…

10. Prepare the Empty Battery Cabinet for Cables – Top Cable Entryp. 14
11. Install and Connect the Batteriesp. 17

    WARNING UNEXPECTED EQUIPMENT HANDLING The battery cabinet must not be moved after the batteries have been installed. Failure to follow these instructions can…

12. Add Translated Safety Labels to Your Productp. 17

    The safety labels on your product are in English and French. Sheets of translated replacement safety labels are provided with your product. 1. Locate the…

13. Final Installationp. 18

    1. Reinstall the two front covers. Bottom Cable Entry System Top Cable Entry System 2. Fasten the front anchoring bracket to the empty battery cabinet. Front…