QNAP TVS-1282T3 (TVS-1282T3-I5-16G) user manual

Contents

1. Safety Warningsp. 9

   1. The NAS can operate normally in the temperature of 0ºC–40ºC (32ºF -104ºF) and relative humidity of 5%–95%. Please make sure the environment is…

2. Chapter 1. CPU and Memory Specificationsp. 10

   Caution: Modifying the hardware, software, or firmware of the QNAP products will void the warranty. QNAP is not responsible for any form of damage or loss of…

3. Chapter 2. Power Button and Reset Button Behaviorp. 17

    Power button: Press to turn on or turn off. System Power button (Turn on) Power button (Hardware turn off) Power button (Force turn off) All models Press…

4. Chapter 3. USB One Touch Copyp. 18

   This feature is only provided by NAS models with a USB One Touch Copy button. Please visit http://www.qnap.com for more details. System Number of seconds…

5. Chapter 4. LED and Alarm Buzzer Specificationsp. 19

   The LED indicators of the NAS indicate the system status and information. When the NAS is turned on, check the following items to make sure the system status…

6. Chapter 5. Beep alarm: All NAS modelsp. 21

   The beep alarm can be disabled in “Control Panel” > “System Settings” > “Hardware”. Beep sound Number of Times Description Short beep (0.5 sec) 1 1. The NAS is…

7. Chapter 6. Hot-swap Hard Drivesp. 22

   The QNAP NAS is compatible with 2.5-inch/3.5-inch SATA hard drives from major hard drive brands. For the updated hard drive compatibility list, please visit…

8. 6.1 Install Hard Drivesp. 24

   Follow the below steps to install hard drives on the NAS. 1. Pull down the hard drive lock to release the lock mechanism, press the tray button then the lever…

9. 6.2 Install M.2 SSDsp. 25

   Follow the below steps to install M.2 SSDs in the NAS. 1. Loosen the screws from the rear to remove the cover (TVS-682 series: 3 screws; TVS-882 series: 6…

10. 6.3 Hot-swap Hard Drivesp. 27

    The NAS supports hot-swapping hard drives if 1 member drive crashes in RAID 1 or 1–2 member drives crash in RAID 5 or RAID 6. Follow these steps to hot-swap…

11. Chapter 7. Upgrade Memory on QNAP NAS (RAM Module Installation)p. 28

    Warning:  The following instructions should only be performed by an authorized and trained technician.  Strictly adhere to the instructions to install a RAM…

12. Chapter 8. Expansion Card Installationp. 32
13. Chapter 9. RAID Recoveryp. 38

    The QNAP NAS supports recovery of a failed RAID group from unintentional disconnection or removal of the hard drives from the system. Users can recover an…

14. Technical Supportp. 40

    QNAP provides dedicated online support and customer service via instant messenger. Online Support: http://www.qnap.com Skype: qnapskype Forum…

15. Appendix A: Product Compliance Classp. 41

    NAS Models FCC CE TVS-682-PT-8G, TVS-682-i3-8G, TVS-882-i3-8G, TVS-882-i5-16G, TVS-882-i5-16G-450W, TVS-1282-i3-8G, TVS-1282-i5-16G, TVS-1282-i7-32G…

16. GNU GENERAL PUBLIC LICENSEp. 42

    Version 3, 29 June 2007 Copyright © 2007 Free Software Foundation, Inc. <http://fsf.org/> Everyone is permitted to copy and distribute verbatim copies of this…