APC SRV5KRILRK user manual

Contents

1. Important Safety Instructionsp. 1

   SAVE THESE INSTRUCTIONS - This manual contains important instructions that should be followed during installation and maintenance of the UPS and batteries.…

2. Product Handling Guidelinesp. 2

   Safety and General Information Inspect the package contents upon receipt. Notify the carrier and dealer if there is any damage. Read the Safety Guide before…

3. Safety and General Informationp. 2

   Inspect the package contents upon receipt. Notify the carrier and dealer if there is any damage. Read the Safety Guide before installing the UPS. • This UPS is…

4. Radio Frequency Warningp. 4

   This UPS is a category C3 product as per IEC 62040-2, meant for commercial and industrial application in the second environment - installation restrictions or…

5. Product Descriptionp. 4

   The APC by Schneider Electric Easy UPS is a high performance, uninterruptible power supply (UPS). The UPS helps to provide protection to electronic equipment…

6. Optional Accessoriesp. 5

   Refer to the APC by Schneider Electric Web site, www.apc.com, for available accessories. User documentation Software, User documentation CD USB cable Battery…

7. Specificationsp. 6

   Environmental NOTE: Charge the battery module at least once in every six months during storage. Physical The equipment is heavy. Follow all lifting guidelines.…

8. Rear Panel Featuresp. 10

   SRVPM5KRIL/SRVPM6KRIL/SRVPM10KRIL SRV6KIL/SRV10KIL Serial communication (RS-232) port Battery connector USB port Ground screw Emergency power off (EPO)…

9. Rack-Mount Installationp. 11

   NOTE: Applicable only for SRV5KRIL/SRV6KRIL/SRV10KRIL models. • Before installing the UPS and the battery pack in the 19 inch rack, be sure that a shelf is…

10. Hardwiringp. 14

    Backfeed protection When the UPS input is connected through external isolators that when opened isolates neutral, below label must be placed at UPS input…

11. Connect the Battery Packp. 17

    NOTE: The illustration below is for SRV5KRIL/SRV6KRIL/SRV10KRIL models. The procedure remains the same for SRV6KIL/SRV10KIL models. 1. Locate the battery…

12. Set Charging Currentp. 17

    The number of battery packs connected in parallel to the UPS and the battery charging current must be configured. Refer to "UPS settings" on page 24 for…

13. Start Upp. 18

    Connect equipment and input power to the UPS 1. Connect equipment to UPS. Refer “Hardwiring” on page 14 for details. 2. Connect battery pack to UPS. Refer…

14. Emergency Power Offp. 19

    The Emergency Power Off (EPO) function is a feature that will immediately remove power to all connected equipment. The EPO switch is internally powered by the…

15. Maintenance Bypassp. 20

    enables the user to isolate the electronic circuitry of the UPS from the mains and the load without interrupting the load operation by connecting the loads…

16. Operationp. 21

    Front panel display features The UPS models are equipped with an intuitive and configurable LCD display. The display complements the software interface as both…

17. Status Indicatorsp. 23

    UPS Display Parameters Operational data displayed in the front panel display is given in the table. Navigate using the UP/DOWN ARROW buttons

18. UPS Display Parametersp. 23

    Operational data displayed in the front panel display is given in the table. Navigate using the UP/DOWN ARROW buttons

19. Configurationp. 23

    Configure UPS parameters Follow the steps to configure parameters in the UPS: 1. Press the ENTER button. 2. Press the UP/DOWN ARROW buttons to navigate to…

20. Advanced Display Navigationp. 25

    The UPS display has five menu options. Press the ENTER button from the Home Screen to access these menu options. Use the UP/DOWN ARROW buttons to navigate…

21. Alerts and Notificationsp. 26

    UPS displays a text code and a numeric code on the display when it detects an internal error. Alerts Contact APC by Schneider Electric for all other alert…

22. Troubleshootingp. 27

    Use the table below to solve minor installation and operation problems. Refer to the APC by Schneider Electric Web site, www.apc.com for assistance with…

23. Transportp. 29

    1. Shut down and disconnect all connected equipment. 2. Disconnect the unit from mains power. 3. Disconnect all internal and external batteries if connected.…

24. Servicep. 29

    section of this manual. Service If the unit requires service, do not return it to the dealer. Follow these steps: 1. Review the Troubleshooting section of the…

25. Limited Factory Warrantyp. 30

    Schneider Electric IT Corporation (SEIT), warrants its products to be free from defects in materials and workmanship for a period of two (2) years from the…

26. APC by Schneider Electric Worldwide Customer Supportp. 32

    Customer support for this or any other APC by Schneider Electric product is available at no charge in any of the following ways: • Visit the APC by Schneider…

27. User Manual Easy UPS On-Line SRV5KRIL, SRV6KRIL, SRV10KRIL, SRV6KIL and SRV10KILp. 1