APC Galaxy VS UPS 30kW 400V for up to 4 internal 9Ah smart modular battery strings (GVSUPS30K0B4HS) user manual

Contents

1. Important Safety Instructions — SAVE THESE INSTRUCTIONSp. 5

   UPS Important Safety Instructions — SAVE THESE INSTRUCTIONS Read these instructions carefully and look at the equipment to become familiar with it before…

2. Overview of User Interfacep. 7

   UPS Overview of User Interface Display Overview of the Home Screen A. Home button - tap here on any screen to return to the home screen. B. Main menu button -…

3. Operation Modesp. 12

   The Galaxy UPS has two different levels of operation modes: • UPS mode: The operation mode of the individual UPS. See UPS Modes, page 12. • System mode: The…

4. Configurationp. 16

   Configure the UPS Input NOTE: This configuration is mandatory for correct UPS operation. 1. Tap Configuration > UPS. a. Set the Mains configuration to Single…

5. Operation Proceduresp. 35

   UPS Operation Procedures Start Up the UPS System from Off Mode NOTE: Use this procedure to start up a UPS from Off mode with no supplied load. If you are…

6. Testsp. 47

   UPS Tests The UPS system can perform the following tests to ensure correct performance of the system: • Buzzer • Status LEDs • Breaker lamp • Runtime…

7. Maintenancep. 49

   UPS Maintenance Connect Temperature/Humidity Sensor (Option) Temperature/humidity sensor (AP9335Tor AP9335TH) can be connected to the network management card.…

8. Troubleshootingp. 56

   Status LED Lighting per UPS Operation Mode If the display becomes inoperable, you can see the UPS operation mode via the status LEDs behind the front panel. •…