Fujitsu P27-9 TS QHD (S26361-K1693-V160) user manual

Contents

1. FUJITSU Display P27-9 TE QHD / P27-9 TS QHDp. 1
2. Your LCD screenp. 9

   has a whole range of useful features and functions, e.g.: • TFT display (Thin Film Transistor; active matrix) • minimal space requirements thanks to slim…

3. Important notesp. 11

   Importantnotes Notes In this chapter you will find information regarding safety which it is essential to take note of when working with your device. Safety…

4. Getting startedp. 15

   Unpacking and checking the delivery The display surface of the device is sensitive to pressure and scratches. Always hold the device by the casing! The…

5. Operationp. 23

   Switching the device on and off 1 2 1 2 1 = ON/OFF switch 2 = Status LED The colour of the status LED alters in the following way: Status LED Status blue…

6. Driver installationp. 44

   The monitor and network drivers are installed automatically whenever the Microsoft Windows operating system is updated. ► For manual installation, download the…

7. Notes on the program "DisplayView"p. 47

   DisplayView is a program for Microsoft Windows operating systems, which provides the user with a simple user interface for adapting functions that are normally…

8. Notes on power managementp. 49

   If your computer is equipped with power management (power-saving mode), the monitor can fully support this function. Here the monitor does not distinguish…

9. Notes on USB Power Delivery (USB-PD)p. 50

   USB-PD is a function defined by the USB Implementers Forum, Inc., in accordance with the current specification of USB-PD Version 2.0. It provides a way to…

10. Notes about the KVM functionp. 51

    Your monitor has a KVM function. This involves the two USB ports designated as "Upstream" being switched over in response to the selected input signal. Input…

11. Notes on All-in-One operationp. 52

    The functions described here can only be assured in combination with selected FUJITSU Notebooks, Tablets and PCs that have a native USB-C connection with…

12. Notes on low blue light modep. 56

    This monitor has a "low blue light" function, which can be selected in the OSD menu. This "low blue light" function reduces the blue light emission of the…

13. Notes on ergonomic colour adjustmentp. 57

    If you select colours for the monitor in your application programmes, take note of the information below. The primary colours blue and red on a dark background…

14. Explanatory information about standard ISO 9241-307p. 58

    Permanently unlit or lit pixels Today’s production techniques cannot guarantee an absolutely fault-free screen display. Depending on the total number of pixels…

15. Troubleshootingp. 59

    Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another…

16. Technical specificationp. 61

    Technical specification Technical specification Condensation is not permitted, neither in the rated range of operation nor in the limit range of operation.…

17. Appendicesp. 66

    TCO: "https://support.ts.fujitsu.com/IndexDownload.asp?SoftwareGuid=0b1846d6-c0bc-4535-8ad5- 1adb49610945" ENERGY STAR®…