APC SRTL180RM2UBP user manual

Contents

1. Important Safety Instructionsp. 1

   SAVE THESE INSTRUCTIONS - This manual contains important instructions that should be followed during installation and maintenance of the Smart-UPS and…

2. Product Handling Guidelinesp. 2
3. Safety and General Informationp. 2

   Connect only SELV circuits to all the communication ports. • Changes and modifications to this unit not expressly approved by Schneider Electric could void the…

4. Battery Safetyp. 2

   The battery module typically lasts for 10 years. Environmental factors impact the life of the battery module. Elevated ambient temperatures, poor quality…

5. Inspect the contents upon receipt. Notify the carrier and dealer if there is damagep. 3

   Front bezel Replaceable Battery Modules (2x) Tie bracket Flat head screws (2x) to secure tie brackets • Stabilizer brackets (1 pair) • Flat head screws (4x) to…

6. Specificationsp. 4

   EN 990-6459A-002 – 08/2023 4 Specifications For additional specifications, refer to our web site, www.apc.com

7. Environmentalp. 4
8. Physicalp. 4
9. Battery Modulep. 5

   Front Panel Features Battery type Lithium-Ion Replacement battery module This UPS has replaceable battery modules. Refer to the appropriate replacement battery…

10. Front Panel Featuresp. 5

    EN 990-6459A-002 – 08/2023 Battery Module Front Panel Features Battery type Lithium-Ion Replacement battery module This UPS has replaceable battery modules.…

11. Rear Panel Featuresp. 6

    EN 990-6459A-002 – 08/2023 6 Rear Panel Features Battery receptacle Connect the battery connection cable from an additional XLBP to this receptacle. Ground…

12. Installationp. 7
13. Rack-Mount Installationp. 7

    NOTE: UPS model SRTL5KRM2UT has been used in the illustrations. The installation process is identical for all UPS models and the respective compatible XLBP…

14. Tower Installationp. 8
15. Connect Ground and Battery Cablesp. 10

    EN 990-6459A-002 – 08/2023 10 Connect Ground and Battery Cables NOTE: UPS model SRTL5KRM2UT has been used in the illustrations. The installation process is…

16. Connect the ground cablep. 10

    1. Locate and remove the ground screw on the rear panel of both the UPS and XLBP. 2. Secure cable lug on one end of the ground wire to the ground terminal on…

17. Connect a single XLBP to UPSp. 11

    Connect multiple XLBPs to UPS Remove the battery receptacle protection cover in the UPS. Connect the battery communication cable  and battery connector…

18. Connect multiple XLBPs to UPSp. 11

    Remove the battery receptacle protection cover in the UPS. Connect the battery communication cable  and battery connector cable . Connect the first XLBP…

19. Disconnecting the XLBPp. 12

    EN 990-6459A-002 – 08/2023 12 Disconnecting the XLBP Hold the cord provided on the battery connector and pull it towards you. The battery connector will get…

20. Removing the RBM from XLBPp. 12

    CAUTION RISK OF FALLING EQUIPMENT • The equipment is heavy. Always practice safe lifting techniques adequate for the weight of the equipment. • Support the RBM…

21. Smart Battery Managementp. 13
22. Definitionsp. 13

    Replaceable Battery Module (RBM): A string of battery cells arranged to produce a battery assembly with a connector. Replacement RBMs can be ordered from our…

23. Maintenancep. 13

    RBM maintenance: The APC RBM uses Lithium ion battery cells and does not require maintenance. • Battery health monitoring: The battery energy output and…

24. End of useful lifep. 13

    Near end of life notification: An alert message will appear on the UPS display interface screen when a RBM is approaching the end of its useful life. For…

25. Recommended actions after installing new RBM or XLBPp. 14

    The following actions should be performed after installing a new RBM or XLBP: • When a new XLBP is installed, the Battery status LED illuminates green in both…

26. User interfacep. 14

    ” on page 14 for details. • Verify that the UPS is connected to input power and output power is turned on. – Go to the UPS display interface, use the status…

27. Replace the RBM in XLPBp. 15

    A RBM should only be disconnected or removed from the XLBP temporarily as part of the battery replacement procedure. 1. Refer to “Removing the RBM from XLBP”…

28. Troubleshootingp. 15

    EN 990-6459A-002 – 08/2023 Replace the RBM in XLPB A RBM should only be disconnected or removed from the XLBP temporarily as part of the battery replacement…

29. Limited Factory Warrantyp. 15

    Schneider Electric IT Corporation (SEIT), warrants its products to be free from defects in materials and workmanship for a period of five (5) years from the…

30. APC Worldwide Customer Supportp. 16