APC Smart-UPS C (SMC2000I) user manual

Contents

1. Important Safety Messagesp. 3

   SAVE THESE INSTUCTIONS - This manual contains important instructions that should be followed during installation and maintenance of the Smart-UPS and…

2. Product Handling Guidelinesp. 3

   DANGER DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING WARNING indicates a hazardous situation…

3. Safety and General Informationp. 4

   Inspect the package contents upon receipt. Notify the carrier and dealer if there is any damage. • Adhere to all national and local electrical codes. • All…

4. Radio Frequency Warningp. 5

   WARNING: This is a category C2 UPS product. In a residential environment, this product may cause radio interference, in which case the user may be required to…

5. Product Descriptionp. 6

   The APC™ by Schneider Electric Smart-UPS™ C is a high performance uninterruptible power supply (UPS). It provides protection for electronic equipment from AC…

6. Specificationsp. 6

   For additional specifications, refer to the APC by Schneider Electric web site at www.apc.com

7. Physicalp. 6

   Environmental Weight specifications UPS + Battery Battery 1000 VA models 17.24 kg (38 lb) 5.1 kg (11.20 lb) 1500 VA models 20.41 kg (45 lb) 7.7 kg (16.90 lb)…

8. Environmentalp. 6
9. Product Overviewp. 7

   Front panel features

10. Front panel featuresp. 7
11. Rear panel featuresp. 7
12. Installationp. 8

    For UPS installation information, refer to the Installation Guide for the Smart-UPS C 1000/1500/2000/ 3000 VA tower included with the UPS. The Installation…

13. Operationp. 9

    Note: The UPS will charge to 90% capacity in the first three hours of normal operation. Do not expect full battery runtime capability during this initial…

14. Connect equipment to the UPSp. 9

    2. Connect the UPS to a two-pole, three-wire, grounded source. Connect equipment to the UPS CAUTION RISK OF ELECTRIC SHOCK • Adhere to all local and national…

15. Sensitivity adjustment settingsp. 10

    The UPS detects and reacts to line voltage distortions by transferring to battery backup power to help protect connected equipment. In situations where the…

16. Status Indicatorsp. 10

    Display panel features Low sensitivity Medium sensitivity High sensitivity (Default) 120 Vac: 97-136 Vac 120 Vac: 103-130 Vac 120 Vac: 106-127 Vac 230 Vac…

17. Feature Reference Guidep. 13
18. Normal Modep. 13

    Configuration Mode The Configuration Mode provides additional options for the UPS. Press and hold the MUTE and DISPLAY buttons for 2 seconds until the system…

19. Configuration Modep. 13

    The Configuration Mode provides additional options for the UPS. Press and hold the MUTE and DISPLAY buttons for 2 seconds until the system emits a short beep…

20. Troubleshootingp. 15

    Problem and Possible Cause Solution The UPS will not turn on or there is no output The UPS has not been turned on. Press the ON button once to turn on the UPS.…

21. Battery Replacementp. 16

    Always recycle used batteries. For information on recycling a used battery, refer to the Battery Disposal Information sheet included with the replacement…

22. Always recycle used batteries. For information on recycling a used battery, refer to the Battery Disposal Information shp. 16

    Battery life is highly dependent on temperature and use. To identify when to replace batteries, Smart- UPS have a predictive battery replacement date indicator…

23. Transportp. 17

    1. Shut down and disconnect all connected equipment. 2. Disconnect the unit from utility power. 3. Disconnect all internal and external batteries (if…

24. Servicep. 17

    section of this manual. Service If the unit requires service, do not return it to the dealer. Follow these steps: 1. Review the Troubleshooting section of the…

25. Two Year Limited Factory Warrantyp. 18

    Schneider Electric IT Corporation (SEIT), warrants its products to be free from defects in materials and workmanship for a period of two (2) years from the…