Loading manual…
QNAP QSW-M2116P-2T2S user manual
- Type
- User manual
- Language
- English
- Pages
- 22
- Category
- Network switches
- Models
- QSW-M2116P-2T2S
Open PDFOpens the file on objects.icecat.biz.
Contents
- 1. About QSSp. 3
QSS is a centralized management tool for your managed QNAP switch devices. QSS User Guide About QSS 2
- 2. Switch Accessp. 4
Method Description Requirements Web browser You can access the switch using any computer on the same network if you have the following information: • Switch…
- Accessing the Switch Using a Browserp. 4
Computer that is connected to the same network as the switch • Web browser Qfinder Pro Qfinder Pro is a desktop utility that enables you to locate and access…
- Accessing the Switch Using Qfinder Prop. 5
1. Install Qfinder Pro on a computer that is connected to the same network as the switch. Tip To download Qfinder Pro, go to https://www.qnap.com/en/utilities.…
- Getting Startedp. 5
1. Log in to the switch as an administrator. The default administrator account is admin. For details, see Switch Access. 2. Configure the system IP settings.…
- 3. Client Device Managementp. 6
The MAC History screen displays information about devices connected to the switch. This screen provides access to all the connected devices and access to…
- Scanning for Connected Devicesp. 6
1. Go to Devices > MAC History . 2. Click Scan. QSS scans for connected devices
- Sending a WoL Packet to a Devicep. 6
1. Go to Devices > MAC History . 2. Identify a previously connected device. 3. Click . The Send WoL Command window opens. 4. Select a WoL configuration.…
- Deleting a MAC Addressp. 6
- Clearing the MAC Address Historyp. 7
1. Go to Devices > MAC History . 2. Click Clear. A dialog box opens. 3. Click Clear. QSS clears the MAC address history. QSS User Guide Client Device…
- 4. Network Managementp. 8
This section describes how to use the QSS network settings to configure the switch. Basic network configuration of the switch includes port management, VLAN…
- Configuring Port Settingsp. 8
1. Go to Configuration > Ports > Port Configuration . 2. Identify a port. 3. Configure the settings. Setting Description State Controls the status of the port…
- Managing PoE Settingsp. 8
Power over Ethernet (PoE) systems pass electric power along Ethernet cables, and allow a single cable to provide both a data connection and electric power to…
- Managing VLAN Groupsp. 9
A virtual LAN (VLAN) groups multiple network devices together and limits the broadcast domain. Members of the VLAN are isolated and network traffic is only…
- Managing Link Aggregation Groupsp. 10
Link Aggregation Control Protocol (LACP) allows you to combine multiple network adapters into a single logical network interface. This ensures high port…
- Managing Port Trafficp. 11
The Traffic section of QSS provides port traffic configuration options. The MAC Address Table page gives access to unicast traffic configuration options by…
- Adding an Access Control List Entryp. 12
An Access Control List (ACL) controls access to specific network objects by limiting which IP address or MAC address can connect. The Security page displays…
- Configuring IGMP Snoopingp. 13
The Internet Group Management Protocol (IGMP) manages membership to IP multicast groups. IGMP is used by IP hosts and adjacent multicast routers to establish…
- Configuring QoS Settingsp. 14
Quality of service (QoS) improves network traffic shaping by classifying and prioritizing different network devices and packets. 1. Go to Configuration > QoS .…
- Configuring Port Mirroringp. 14
Port mirroring monitors network traffic and forwards a copy of a packet from one network switch port to another. 1. Go to Configuration > Port Mirroring . 2.…
- Controlling the LLDP Statusp. 14
The Link Layer Discovery Protocol (LLDP) uses periodic broadcasts to advertise device information over the network and discover neighboring devices. LLDP is a…
- Configuring Loop Protectionp. 15
A loop occurs when data packets are continually forwarded between ports. If a loop is detected, loop protection can disable the interface. 1. Go to…
- Deleting a Network Settingp. 15
1. Go to Configuration. 2. Identify a network setting. Note Deleting network settings is applicable only to ACL rules, link aggregation, static MAC addresses…
- Monitoring Network Settingsp. 15
You can monitor the following network settings in the Configuration section of QSS. These settings can be used to monitor and diagnose switch operations. QSS…
- 5. System Managementp. 17
The QSS System Management section provides device configuration and firmware update configuration options
- System Settingsp. 17
This screen contains system configuration options such as system information, IP information, password settings, time settings, and backup and restore settings…
- Firmware Managementp. 20
QNAP recommends keeping your device firmware up to date. This ensures that your device can benefit from new QSS software features, security updates…