APC Easy Rack (ER6402) user manual

Contents

1. Introductionp. 5

   The APC by Schneider Electric Easy Racks are quality racks for storage of industry-standard (EIC/ECA-310), 19 in. (483 mm) rack-mounted hardware, which…

2. Safetyp. 6

   Read the instructions carefully to become familiar with the equipment before trying to install, operate, service or maintain it. The addition of this symbol to…

3. Safety Instructionsp. 7

   This manual contains important instructions that must be followed during the installation and customization of the rack. DANGER ELECTRIC SHOCK HAZARD…

4. Component Identificationp. 8

   ER6822 shown (48U, 600W x 1200D) Item Description Item Description 1 Roof 7 Caster (4) 2 Rear Doors (2) 8 Leveling Feet (4) 3 Removable Top Side Panel…

5. Hardwarep. 8

   bag 4 Removable Bottom Side Panel (2) 10 Removable and reversible front door 5 Zero U Accessory Mounting Bracket (4) Can be mounted in various locations…

6. Tools Providedp. 9
7. Rack Installationp. 10

   Move the Rack WARNING TIP HAZARD • This rack is easily tipped. Use extreme caution when unpacking or moving. • At least two people are required to unpack and…

8. Move the Rackp. 10

   WARNING TIP HAZARD • This rack is easily tipped. Use extreme caution when unpacking or moving. • At least two people are required to unpack and move the rack.…

9. Level the Rackp. 12

   The leveling feet at the corners of the Easy Rack provide a stable base if the floor is uneven, but they cannot compensate for a badly sloped surface. Ensure…

10. Join the Racksp. 12

    Join racks with the provided brackets to provide alignment and added stability. Racks may be joined with or without the side panels installed. WARNING TIP…

11. Ground the Rackp. 13

    DANGER ELECTRIC SHOCK HAZARD Connection of the rack to the Common Bonding Network (CBN) of the building is required. Failure to follow these instructions will…

12. Secure the Rackp. 14

    WARNING TIP HAZARD Secure the rack to the floor before installing equipment. Failure to follow these instructions can result in death, serious injury, or…

13. Side Panels, Roof, and Doorsp. 14

    Locking Top Side Panels The top panels on each side of the cabinet are locked and must be unlocked with a key (provided) before they can be opened or removed.…

14. Equipment Installationp. 18

    NOTE: Easy Racks are intended for use with Listed equipment. If un-Listed equipment is installed, you should evaluate the safety of your configuration

15. Adjust the Vertical Mounting Flangesp. 18

    Vertical mounting flanges come factory-installed at 737 mm (29 in.), the proper location for use with rack-mountable equipment. The mounting flanges are…

16. Zero U Accessory Mounting Bracketsp. 21

    The Zero U Accessory Mounting Brackets may be moved to different locations within the rack in order to mount your equipment. There are two different Mounting…

17. Install the Equipmentp. 22

    WARNING TIP HAZARD • This rack is easily tipped. Make sure you have secured the rack to the floor before installing equipment. • Install the heaviest equipment…

18. Accessoriesp. 24

    Optional accessories can be ordered separately. Installation hardware is included with the accessory. See accessory list below. SKU Description ER7BP1U 1U…

19. Specificationsp. 28

    General specifications for Easy Racks: SKU Height with Castor Height without Castor Width Depth U Space ER6482 1198 mm (47.16 in.) 1162 mm (45.74 in.) 600 mm…

20. Five-Year Factory Warrantyp. 29

    The limited warranty provided by APC by Schneider Electric in this Statement of Limited Factory Warranty applies only to products you purchase for your…