APC Power Saving Back-UPS RS 1200 230V CEE 7/5 (BR1200G-FR) user manual

Contents

1. Back-UPS™ Pro 1200/1500 230 V Installation and Operationp. 1
2. Inventoryp. 1

   Safety Do not install the Back-UPS in direct sunlight, in excessive heat, humidity, or in contact with fluids. CAUTION RISK OF HYDROGEN SULPHIDE GAS AND…

3. Safetyp. 1

   Messages SAVE THESE INSTRUCTIONS - This manual contains important instructions that should be followed during installation and maintenance of the UPS and…

4. Important Safety Messagesp. 1

   SAVE THESE INSTRUCTIONS - This manual contains important instructions that should be followed during installation and maintenance of the UPS and batteries. •…

5. Connect the batteryp. 2

   Install PowerChute™ Personal Edition Software APC PowerChute Personal Edition software provides automatic file saving and shutdown of your computer in the…

6. Install PowerChute™ Personal Edition Softwarep. 2

   APC PowerChute Personal Edition software provides automatic file saving and shutdown of your computer in the event of a power outage. Use the USB cable to…

7. Connect the equipmentp. 2

   Battery Backup and Surge Protected outlets When the Back-UPS is receiving input power, the Battery Backup with Surge Protection outlets will supply power to…

8. Battery Backup and Surge Protected outletsp. 2

   When the Back-UPS is receiving input power, the Battery Backup with Surge Protection outlets will supply power to connected equipment. During a power outage or…

9. Master and Controlled outletsp. 2

   To conserve electricity, when the device connected to Master Outlet goes into Sleep or Standby mode, or turns Off, the Controlled device(s) will shut down as…

10. Operationp. 3
11. Power-Saving Functionp. 3

    To conserve electricity, configure the Back-UPS to recognize a Master device, such as a desktop computer or an A/V receiver, and Controlled peripheral devices…

12. Power-Saving Displayp. 3

    The display interface can be configured to be continuously illuminated, or to save energy, it can be configured to darken after a period of inactivity. 1. Full…

13. Unit sensitivityp. 3

    Adjust the sensitivity of the Back-UPS to control when it will switch to battery power; the higher the sensitivity, the more often the Back-UPS will switch to…

14. Front Panel Buttons and Display Interfacep. 4

    Use the three buttons on the front panel of the Back-UPS and the display interface to configure the Back-UPS. Front panel MUTE button POWER ON/OFF button…

15. Alarms and System Eventsp. 5
16. Audible Indicatorsp. 5
17. Status Iconsp. 5

    System Events The Back-UPS will display these event messages Four Beeps Every 30 Seconds Back-UPS is running on battery. You should consider saving any work in…

18. System Eventsp. 5

    Audible Indicators Status Icons System Events The Back-UPS will display these event messages Four Beeps Every 30 Seconds Back-UPS is running on battery. You…

19. Function Button Quick-Referencep. 6

    Function Button Timing (seconds) UPS Status Description Power Power On 0.2 Off Press POWER to start receiving input utility power. If A/C input power is not…

20. Troubleshootingp. 7

    Problem Possible Cause Corrective Action Back-UPS will not switch on. The Back-UPS is not connected to utility power. Ensure that the Back-UPS is securely…

21. Specificationsp. 8
22. Replacement Batteryp. 8

    The battery cartridge typically lasts 3 to 6 years, a shorter period if subjected to frequent outages or elevated temperatures. Battery replacement part for…

23. Warrantyp. 8

    information is available at the APC Web site, www.apc.com. © 02/2022 APC by Schneider Electric. All trademarks are owned by Schneider Electric Industries…

24. APC Worldwide Customer Supportp. 8