APC Smart UPS 750VA 230V USB with UL approval (SUA750IX38) user manual

Contents

1. Important Safety Informationp. 3

   SAVE THESE INSTRUCTIONS - This manual contains important instructions that should be followed during installation and maintenance of the Smart-UPS and…

2. Product Handling Guidelinesp. 3

   Safety and General Information • Adhere to all national and local electrical codes. • All wiring must be performed by a qualified electrician. • Changes and…

3. Safety and General Informationp. 3

   Adhere to all national and local electrical codes. • All wiring must be performed by a qualified electrician. • Changes and modifications to this unit not…

4. Deenergizing safetyp. 4

   The UPS contains internal batteries and may present a shock hazard even when disconnected from AC and DC power. • The AC and DC output connectors may be…

5. Electrical safetyp. 4

   For models with a hardwired input, the connection to the branch circuit (mains) must be performed by a qualified electrician. • 230 V models only: In order to…

6. Battery safetyp. 4

   * Contact APC by Schneider Electric Customer Support to determine the age of the installed battery modules. • Do not operate the UPS until the batteries have…

7. General informationp. 5

   Always recycle used batteries. • Recycle the package materials or save them for reuse. • Select a location sturdy enough for the combined weight of the units.…

8. Radio Frequency Warningp. 5

   WARNING: This is a category C2 UPS product. In a residential environment, this product may cause radio interference, in which case the user may be required to…

9. Introductionp. 5

   The APC™ by Schneider Electric Smart-UPS™ is a high performance uninterruptible power supply (UPS). The UPS provides protection for electronic equipment from…

10. Installationp. 6

    NOTE: The User Manual and Safety Guide are accessible on the APC by Schneider Electric web site, www.apc.com

11. Unpackp. 6

    NOTE: Read the safety instruction sheet before installation. Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage. The packaging is…

12. Position the UPSp. 6
13. Placementp. 6

    Connect the Battery The battery connector is located on the rear panel. For battery connection, push the tethered jumper plug into the corresponding port. 0°C…

14. Connect the Batteryp. 6

    The battery connector is located on the rear panel. For battery connection, push the tethered jumper plug into the corresponding port. 0°C 32°F 40°C 104°F 0%…

15. Connect Equipment and Power to the UPSp. 7

    1. Connect equipment to the UPS. NOTE: A laser printer draws significantly more power than other types of equipment and may overload the UPS. 2. Add…

16. Rear Panelsp. 7

    Basic Connectors 100V/120V 230V Serial Port USB Port TVSS Screw Use only interface kits approved by APC by Schneider Electric. Use only the supplied cable to…

17. Basic Connectorsp. 7

    100V/120V 230V Serial Port USB Port TVSS Screw Use only interface kits approved by APC by Schneider Electric. Use only the supplied cable to connect to the…

18. Operationp. 8

    Front Display Panel Indicator Description Online The UPS is supplying utility power to the connected equipment. AVR Trim The UPS is compensating for a high…

19. Front Display Panelp. 8

    Indicator Description Online The UPS is supplying utility power to the connected equipment. AVR Trim The UPS is compensating for a high utility voltage. AVR…

20. Battery Operationp. 9

    The UPS switches to battery operation automatically when there is an utility power outage. While running on battery, an alarm beeps four times every 30…

21. User Configurable Itemsp. 9

    NOTE: Settings are adjusted through PowerChute software or optional SmartSlot accessory cards. Diagnostic Utility Voltage The UPS has a diagnostic feature that…

22. NOTE: Settings are adjusted through PowerChute software or optional SmartSlot accessory cardsp. 9

    Diagnostic Utility Voltage The UPS has a diagnostic feature that displays the utility voltage. The UPS starts a self-test as part of this procedure. The…

23. Specificationsp. 10

    Storage Store the UPS covered in a cool, dry location, with the battery fully charged. At -15° to +30° C (+5° to +86° F), charge the UPS battery every six…

24. Storagep. 10

    Store the UPS covered in a cool, dry location, with the battery fully charged. At -15° to +30° C (+5° to +86° F), charge the UPS battery every six months. At…

25. Battery Module Maintenancep. 10

    The UPS battery life differs based on usage and environment. Consider replacing the battery every three years. This UPS has an easy to replace, swappable…

26. Removing the Front Bezel and Battery Modulep. 11

    Replacing the Battery Module Reverse the instructions for Removing the Front Bezel and Battery Module. NOTE: To close the battery door, ensure the plungers are…

27. Replacing the Battery Modulep. 11

    Reverse the instructions for Removing the Front Bezel and Battery Module. NOTE: To close the battery door, ensure the plungers are in the extended position…

28. Troubleshootingp. 11

    Use the chart below to solve minor UPS installation and operation problems. Refer to www.apc.com with complex UPS problems.     Be sure to deliver the…

29. Transport and Servicep. 13

    Transport 1. Shut down and disconnect all connected equipment. 2. Disconnect the unit from utility power. 3. Disconnect all internal and external batteries (if…

30. Transportp. 13

    and Service Transport 1. Shut down and disconnect all connected equipment. 2. Disconnect the unit from utility power. 3. Disconnect all internal and external…