APC AP7821B user manual

Contents

1. Introductionp. 9

   The AP7XXXB Series covered in this manual includes the following equipment: AP78XXB Metered Rack PDU AP79XXB Switched Rack PDU AP71XXB In-Line Current Meter…

2. Getting Startedp. 12

   To start using the device: 1. Install the device using the Installation Instructions that were shipped with your product. 2. Apply power and connect to your…

3. Device Display Panelsp. 16

   Link - Rx/Tx 10/100 Status Serial Port Reset - Warning - OK - Overload pdu0803a Link - Rx/Tx 10/100 Status Serial Port Reset Press and hold to invert display -…

4. Command Line Interfacep. 19

   About the Command Line Interface (CLI) NOTE: Depending on the features of your device, some of the CLI commands will not apply. You can use the Command Line…

5. Web User Interfacep. 80

   Supported Web Browsers NOTE: Depending on the features of your device, some of the Web User Interface (Web UI) pages described will not apply. You can use the…

6. Status Tabp. 85

   About the Status Tab Use the Status tab to: • View the status for the device or the network • Under the device option, users can access the following: Alarms…

7. Controlp. 88

   The Control menu options enable you to take immediate actions affecting active user management and the security of your network.

8. Configurationp. 91

   About the Configuration Tab Under the Configuration tab, several menu options are available to make changes to the devices: • View the load status for the…

9. Tests Tabp. 131

   Setting the Network Status LED to Blink Path: Tests > Network > LED Blink If you are having trouble finding your device, enter a number of minutes in the LED…

10. Logs Tabp. 132

    Event, Data and Firewall Logs Event log Path: Logs > Events By default, the log displays all events recorded during the last two days, starting with the latest…

11. About Tabp. 138

    About the Rack PDU Path: About > RPDU/Network The hardware information is useful to Schneider Electric Customer Support for troubleshooting problems with the…

12. Device IP Configuration Wizardp. 139

    Capabilities, Requirements, and Installation How to use the Wizard to configure TCP/IP settings The Device IP Configuration Wizard can discover devices that do…

13. How to Export Configuration Settingsp. 140

    Retrieving and Exporting the .ini File Summary of the procedure A Super User/Administrator can retrieve the .ini file of a device and export it to another…

14. NMC Firmware Upgradesp. 144

    Upgrading Firmware When you upgrade the firmware on the device Network Management Card (NMC), you obtain the latest new features, security and performance…

15. Troubleshootingp. 149

    Access Problems For problems that persist or are not described here, contact APC Customer Care at www.apc.com. Problem Solution Unable to ping the Rack PDU If…

16. Radio Frequency Interferencep. 151

    Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.…

17. Source Code Copyright Noticep. 152

    cryptlib copyright Digital Data Security New Zealand Ltd 1998. Copyright © 1990, 1993, 1994 The Regents of the University of California. All rights reserved.…