APC Back-UPS Pro (BR900GI) user manual

Contents

1. Inventoryp. 1

   Safety and General Information Inspect the package contents upon receipt. Notify the carrier and dealer if there is any damage. Read the Safety Guide supplied…

2. Safety and General Informationp. 1

   Inspect the package contents upon receipt. Notify the carrier and dealer if there is any damage. Read the Safety Guide supplied with this unit before…

3. Connect the Batteryp. 1

   Install PowerChute™ Personal Edition Software APC PowerChute Personal Edition software provides automatic file saving and shutdown of your computer in the…

4. Install PowerChute™ Personal Edition Softwarep. 1

   APC PowerChute Personal Edition software provides automatic file saving and shutdown of your computer in the event of a power failure. Use the cable supplied…

5. Connect the Equipmentp. 2

   Battery Backup and Surge Protected outlets When the Back-UPS is receiving input power, the Battery Backup with Surge Protection outlets will supply power to…

6. Battery Backup and Surge Protected outletsp. 2

   When the Back-UPS is receiving input power, the Battery Backup with Surge Protection outlets will supply power to connected equipment. During a power outage or…

7. Master and Controlled outletsp. 2

   To conserve electricity, when the device connected to Master Outlet goes into Sleep or Standby mode, or turns Off, the Controlled device(s) will shut down as…

8. Operationp. 3

   Power-Saving Function To conserve electricity, configure the Back-UPS to recognize a Master device, such as a desktop computer or an A/V receiver, and…

9. Power-Saving Functionp. 3

   To conserve electricity, configure the Back-UPS to recognize a Master device, such as a desktop computer or an A/V receiver, and Controlled peripheral devices…

10. Power-Saving Displayp. 3

    The display interface can be configured to be continuously illuminated, or to save energy, it can be configured to darken after a period of inactivity. 1. Full…

11. Unit sensitivityp. 3

    Adjust the sensitivity of the Back-UPS to control when it will switch to battery power; the higher the sensitivity, the more often the Back-UPS will switch to…

12. Front Panel Buttons and Display Interfacep. 4

    Use the three buttons on the front panel of the Back-UPS and the display interface to configure the Back-UPS. Front panel Mute button Power On/Off button…

13. Warnings and System Faultsp. 5
14. Audible Warningsp. 5
15. Warning Iconsp. 5

    System Faults The Back-UPS will display these fault messages. For faults F01 and F02, contact APC Technical Support. Four Beeps Every 30 Seconds Back-UPS is…

16. System Faultsp. 5

    Audible Warnings Warning Icons System Faults The Back-UPS will display these fault messages. For faults F01 and F02, contact APC Technical Support. Four Beeps…

17. Function Button Quick Referencep. 6

    Function Button Timing (seconds) UPS Status Description Power Power On 0.2 Off Press POWER to start receiving input utility power. If A/C input power is not…

18. Troubleshootingp. 7

    Problem Possible Cause Corrective Action Back-UPS will not switch on. The Back-UPS is not connected to utility power. Ensure that the Back-UPS is securely…

19. Specificationsp. 8
20. Servicep. 8

    If the Back-UPS arrived damaged, notify the carrier. If the Back-UPS requires service, do not return it to the dealer. • 1. Consult the Troubleshooting section…

21. Replace Batteryp. 8

    Deliver the used battery to a recycling facility. Replace the used battery with an APC by Schneider Electric approved battery. Replacement batteries can be…

22. Warrantyp. 8

    information is available at the APC by Schneider Electric Web site, www.apc.com. © 2014 APC by Schneider Electric. APC, the APC logo, and PowerChute are owned…

23. APC by Schneider Electric IT Customer Support Worldwidep. 8

    For country specific customer support, go to the APC by Schneider Electric Web site, www.apc.com. Model BR900GI VA 900 VA Maximum Load 540 W Nominal Input…