APC SUA500PDRI-S installation instructions

Contents

1. Mount the UPS on DIN Railp. 1

   This unit is designed to mount on a heavy duty DIN rail or on the back panel of an enclosure. For details on DIN rail installation refer to the DIN rail…

2. Battery Installationp. 2

   The UPS battery is shipped in a separate carton. Refer to the installation guide included with the replacement battery for installation instructions. Front…

3. Connect Power and Equipment to the UPSp. 2

   Hardwiring should be performed by a qualified electrician. Use appropriate size wires. 1. The UPS features a transient voltage surge-suppression (TVSS) screw…

4. Connectorsp. 3

   Communication Port Contact Closure Port Output Contact Ratings

5. Emergency Power Offp. 3

   The emergency power off (EPO) feature is user configurable. EPO provides immediate de-energizing of connected equipment from a remote location, without…

6. Operationp. 4
7. Display Panel Indicators and Function Buttonsp. 4

   Indicator LED Indicator Title Description On-Line The UPS is supplying AC power to the connected equipment (see Troubleshooting). AVR Trim The UPS is…

8. User Configurable Itemsp. 6

   UPS settings Settings are adjusted through PowerChute™ software or optional Network Management Card. Function Factory Default User Selectable Choices…

9. UPS settingsp. 6

   Settings are adjusted through PowerChute™ software or optional Network Management Card. Function Factory Default User Selectable Choices Description Automatic…

10. Storage, Maintenance, Transportp. 8

    Storage Store the UPS covered in a cool, dry location with the batteries fully charged. At 5° to 86° F (–15° to 30° C), charge the UPS battery every six…

11. Storagep. 8

    , Maintenance, Transport Storage, Maintenance, Transport Storage Store the UPS covered in a cool, dry location with the batteries fully charged. At 5° to 86° F…

12. Replacing the Battery Modulep. 8

    This UPS uses a replaceable, hot-swappable battery module. Replacement is a safe procedure, isolated from electrical hazards. You may leave the UPS and…

13. Troubleshootingp. 9

    Use this chart to solve minor installation and operation problems. Problem and/or Possible Cause Solution UPS will not turn on The battery is not connected…

14. Servicep. 12

    If the unit requires service, do not return it to the dealer. Follow these steps: 1. Review the Troubleshooting section of the manual to eliminate common…

15. Transport the unitp. 12

    1. Shut down and disconnect all connected equipment. 2. Disconnect the unit from AC power. 3. Disconnect all internal and external batteries (if applicable).…

16. APC by Schneider Electric IT Worldwide Customer Supportp. 12

    Go to the APC Web site, www.apc.com for country specific customer support.

17. Warrantyp. 13

    The standard warranty is two (2) years from the date of purchase. Schneider Electric IT (SEIT) standard procedure is to replace the original unit with a…