APC Smart-UPS SMT1500RMI1U user manual

Contents

1. Product Descriptionp. 3

   The APC™ by Schneider Electric Smart-UPS™ is a high performance uninterruptible power supply (UPS). The UPS provides protection for electronic equipment from…

2. Important Safety Messagesp. 3

   The addition of this symbol to a Caution product safety label indicates that a hazard exists that can result in injury and product damage if the instructions…

3. Safety and General Informationp. 3

   Inspect the package contents upon receipt. Notify the carrier and dealer if there is any damage. Read the Safety Guide supplied with this unit before…

4. Specificationsp. 4

   For additional specifications, refer to the APC by Schneider Electric Web site at www.apc.com. Weight Specifications UPS + Battery Pack Battery Pack 24 kg (53…

5. Product Overviewp. 5

   Front panel features Rear panel features

6. Installationp. 5

   For UPS installation information, refer to the Smart-UPS 1200/1500 VA 100/120/230 Vac Rack-Mount 1U Installation Guide that is included with the UPS. The…

7. Operationp. 6

   Connect Equipment Note: The UPS will charge to 90% capacity in the first three hours of normal operation. Do not expect full battery runtime capability during…

8. Connect Equipmentp. 6

   Note: The UPS will charge to 90% capacity in the first three hours of normal operation. Do not expect full battery runtime capability during this initial…

9. Display Panelp. 7

   Overview Display interface operation Press either the ESC or ENTER buttons to access the main menu. Use the UP/DOWN arrow buttons to scroll through menu…

10. Configurationp. 10

    UPS Settings Start up settings At initial start up use the Setup Wizard to configure the following settings. Function Factory Default Options Description…

11. UPS Settingsp. 10

    Start up settings At initial start up use the Setup Wizard to configure the following settings. Function Factory Default Options Description Language English •…

12. Switched Outlet Groupsp. 12

    Overview The UPS has two Switched Outlet Groups. Each can be configured to independently perform the following actions: • Turn off: Disconnect from power…

13. Troubleshootingp. 14

    Problem and Possible Cause Solution The UPS will not turn on or there is no output The UPS has not been turned on. Press the ON button once to turn on the UPS.…

14. Servicep. 15

    If the unit requires service, do not return it to the dealer. Follow these steps: 1. Review the Troubleshooting section of the manual to eliminate common…

15. Two Year Limited Factory Warrantyp. 16

    Schneider Electric IT Corporation (SEIT), warrants its products to be free from defects in materials and workmanship for a period of three (3) years excluding…