APC Back-UPS Pro (BR1500G-GR) user manual

Contents

1. Back-UPS® BR1200G-GR/BR1500G-GRp. 1
2. Inventoryp. 1

   Safety This unit is intended for indoor use only. Do not operate this unit in direct sunlight, in contact with fluids, or where there is excessive dust or…

3. Safetyp. 1

   This unit is intended for indoor use only. Do not operate this unit in direct sunlight, in contact with fluids, or where there is excessive dust or humidity. 1…

4. Connect the batteryp. 1

   Inventory Safety This unit is intended for indoor use only. Do not operate this unit in direct sunlight, in contact with fluids, or where there is excessive…

5. PowerChute® Personal Edition Softwarep. 2

   Overview PowerChute Personal Edition Software allows you to use your computer to access additional power protection and management features of the Back-UPS.…

6. Overviewp. 2

   PowerChute Personal Edition Software allows you to use your computer to access additional power protection and management features of the Back-UPS. Using…

7. Compatibilityp. 2

   PowerChute is compatible with Windows operating systems only. For a detailed list of supported operating systems, go to www.apc.com, select Software &…

8. Installationp. 2

   and Operation 2 PowerChute® Personal Edition Software Overview PowerChute Personal Edition Software allows you to use your computer to access additional power…

9. Connect the equipmentp. 2

   Battery Backup and Surge Protected outlets When the Back-UPS is receiving input power, the Surge Protection only outlets and the Battery Backup with Surge…

10. Battery Backup and Surge Protected outletsp. 2

    When the Back-UPS is receiving input power, the Surge Protection only outlets and the Battery Backup with Surge Protection outlets will supply power to…

11. Master and Controlled outletsp. 2

    To conserve electricity, when the device connected to Master Outlet goes into Sleep or Standby mode, or turns off, the Controlled by Master device(s) will shut…

12. Operationp. 4
13. Power-Saving Functionp. 4

    To conserve electricity, configure the Back-UPS to recognize a Master device, such as a desktop computer or an A/V receiver, and Controlled peripheral devices…

14. Power-Saving Displayp. 4

    The display interface can be configured to be continuously illuminated, or to save energy, it can be configured to go dark after a period of inactivity. 1.…

15. Unit sensitivityp. 4

    Adjust the sensitivity of the Back-UPS to control when it will switch to battery power; the higher the sensitivity, the more often the Back-UPS will switch to…

16. Front Panel Buttons and Display Interfacep. 5

    Use the three buttons on the front panel of the Back-UPS and the display interface to configure the Back-UPS. Front panel 1 Mute button 2 Power On/Off button 3…

17. Warnings and System Faultsp. 6
18. Audible Warningsp. 6
19. Warning Iconsp. 6

    System Faults The Back-UPS will display these fault messages. Contact APC Technical Support. Four Beeps Every 30 Seconds Back-UPS is running on battery. You…

20. System Faultsp. 6

    Audible Warnings Warning Icons System Faults The Back-UPS will display these fault messages. Contact APC Technical Support. Four Beeps Every 30 Seconds…

21. Function Button Quick-Referencep. 7

    Function Button Timing (seconds) UPS Status Description Power Power On 0.2 Off Press POWER to start receiving input A/C power. If A/C input power is not…

22. Troubleshootingp. 8

    Problem Possible Cause Corrective Action Back-UPS will not turn on. The Back-UPS is not connected to A/C power. Ensure that the Back-UPS is securely connected…

23. Specificationsp. 9
24. APC Customer Supportp. 9

    Internet www.apc.com

25. Internet www.apc.comp. 9
26. Telephone +1 888 272 3858p. 9

    Warranty The standard warranty is two (2) years from the date of purchase. APC standard procedure is to replace the original unit with a factory reconditioned…

27. Warrantyp. 9

    The standard warranty is two (2) years from the date of purchase. APC standard procedure is to replace the original unit with a factory reconditioned unit.…

28. Servicep. 10

    If the unit requires service, do not return it to the dealer. Follow these steps: 1. Review the TROUBLESHOOTING section of the manual to eliminate common…