APC Back-UPS Pro (BR1500GI) user manual

Contents

1. The battery cartridge typically lasts 3 to 6 years, a shorter period if subjected to frequent outp. 8

   ages or elevated temperatures. Battery replacement part for Back-UPS Pro 1200 and 1500 is APCRBC124. Please recycle spent battery cartridges. Service If the…

2. Four Beeps Every 30 Secondsp. 5

   Back-UPS is running on battery. You should consider saving any work in progress

3. Continuous Beepingp. 5

   Low battery condition and battery run-time is very low. Promptly save any work in progress, exit all open applications, and shut down the operating system

4. Continuous tonep. 5

   Battery Backup outputs are overloaded

5. Chirps for 1 Minute every 5 hoursp. 5

   Battery fails the automatic diagnostic test and should be replaced. If these icons are illuminated... This may be the problem. The Back-UPS is operating on…

6. 0.2p. 6

   Off Press POWER to start receiving input utility power. If A/C input power is not available, the Back-UPS will run

7. Offp. 6

   Press POWER to start receiving input utility power. If A/C input power is not available, the Back-UPS will run

8. Onp. 6
9. 0.2p. 6
10. Onp. 6
11. 0.2p. 6
12. Onp. 6
13. Offp. 6
14. Onp. 6
15. 0.2p. 6
16. Onp. 6

    and Operation 6 Function Button Quick-Reference Function Button Timing (seconds) UPS Status Description Power Power On 0.2 Off Press POWER to start receiving…

17. Faultp. 6

    Reset 2 Fault After a fault has been identified, press POWER to remove the visual indication and return to standby status.