Dell R340 (JCGX2) service manual

Contents

1. Dell EMC PowerEdge R340 Installation and Service Manualp. 3
2. About this documentp. 6

   This document provides an overview about the system, information about installing and replacing components, technical specifications, diagnostic tools, and…

3. Dell EMC PowerEdge R340 system overviewp. 7

   The Dell EMC PowerEdge R340 system is a 1U server that supports: • One Intel Xeon, Core i3, Pentium, or Celeron processor • Four DIMM slots • Two AC power…

4. Initial system setup and configurationp. 15

   Topics: • Setting up your system • iDRAC configuration • Options to install the operating system Setting up your system Perform the following steps to set up…

5. Installing and removing system componentsp. 18

   Topics: • Safety instructions • Before working inside your system • After working inside your system • Recommended tools • Front bezel • System cover • Air…

6. Jumpers and connectorsp. 80

   This topic provides specific information about the jumpers. It also provides some basic information about jumpers and switches and describes the connectors on…

7. System diagnostics and indicator codesp. 83

   The diagnostic indicators on the system front panel display system status during system startup. Topics: • System health and system ID indicator codes • iDRAC…

8. Getting helpp. 88

   Topics: • Contacting Dell • Recycling or End-of-Life service information • Accessing system information by using QRL • Receiving automated support with…

9. Documentation resourcesp. 90

   This section provides information about the documentation resources for your system. To view the document that is listed in the documentation resources table…