Sharp PN-R556 user manual

Contents

1. IMPORTANT INFORMATIONp. 3
2. DEAR SHARP CUSTOMERp. 4
3. SAFETY PRECAUTIONSp. 4

   carefully before using this product. SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and…

4. TIPS AND SAFETY INSTRUCTIONSp. 6
5. MOUNTING PRECAUTIONSp. 7

   This product is for use indoors. • A mounting bracket compliant with VESA specifications is required. • Since the monitor is heavy, consult your dealer before…

6. Supplied Componentsp. 8
7. Part Namesp. 9
8. Connecting Peripheral Equipmentp. 11

   Caution • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the…

9. Connecting the Power Cordp. 13

   Caution • Use only the power cord supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal.…

10. Binding Cablesp. 13

    The supplied cable clamps (affixing type) can be used to clamp the power code and cables connected to the back of the monitor. Caution • Attach the supplied…

11. Removing the Handles (PN-R706/PN-R606 only)p. 14

    Attaching Ceiling Mounting Brackets You can use the ceiling mounting brackets to prevent dropping/falling down. Use the supplied ceiling mounting bracket…

12. Attaching Ceiling Mounting Bracketsp. 14

    You can use the ceiling mounting brackets to prevent dropping/falling down. Use the supplied ceiling mounting bracket fixing screws to secure the brackets.…

13. Attaching the logo stickerp. 15

    Installing the batteries 1. Place your finger on the part marked with the ▲, and then pull the cover off. 2. See the instructions in the compartment and put in…

14. Preparing the Remote Control Unitp. 15
15. Turning Power On/Offp. 17

    Press the POWER button to turn the power ON/OFF. You can also turn the power ON/OFF by pressing the MONITOR ON button/MONITOR OFF button on the remote control…

16. Basic Operationp. 19
17. Menu Itemsp. 22

    Displaying the menu screen Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu items. See…

18. Initialization (Reset)/Functional Restriction Setting (FUNCTION)p. 34

    OSD DISPLAY Shows/hides the menu, modes and messages. The FUNCTION screen cannot be hidden. ON 1 ��������������Shows all menus, modes and messages. ON 2…

19. Controlling the Monitor with a PC (RS-232C)p. 35

    You can control this monitor from a PC via RS-232C (COM port) on the PC. You can also connect multiple monitors via a daisy chain by using a PC. By assigning…

20. Controlling the Monitor with a computer (LAN)p. 47

    Settings to connect to a LAN Set the monitor’s IP address and subnet mask to match the settings of your LAN. These settings can be made on either the monitor…

21. Troubleshootingp. 56

    If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or…

22. Specificationsp. 58

    nProduct Specifications Model PN-R706 PN-R606 LCD component 70" Class [69-1/2 inch (176.56 cm) diagonal] TFT LCD 60" Class [60-1/8 inch (152.66 cm) diagonal]…

23. Mounting Precautions (For SHARP dealers and service engineers)p. 65