Loading manual…
Hisense 100E7NQ PRO (20013955) user manual
- Type
- User manual
- Language
- English
- Pages
- 44
- Category
- TVs
- Models
- 100E7NQ PRO
Open PDFOpens the file on objects.icecat.biz.
Contents
- 页 1p. 1
- 页 2p. 2
Caution Statements Safety Precautions 1. Safety requirements and responsibilities 2. Product Introduction Information 2.1 Term 2.2 System operation schematic…
- 页 3p. 3
Please follow these safety instructions closely to prevent accidents and material losses. These instructions are exclusively intended for qualified…
- 页 4p. 4
DANGER 2 Safety instructions for working on the system 2. Working on the system The unit contains flammable refrigerant R290 (propane C3H8). If there is a…
- 页 5p. 5
3. Safe guard the system 4. Work on the refrigerant circuit Check the refrigerant circuit for leaks. A CO or powder extinguisher must be to hand in the…
- 页 6p. 6
Mechanical loading of lines and components can cause leaks in the refrigerant circuit. Seal the pipe entry to the building using the most suitable current…
- 页 7p. 7
6.1.1 Escaping refrigerant can lead to fire and explosions that result in very serious injuries or death. 6.2.1 If water escapes from the appliance there is a…
- 页 8p. 8
The unit is charged at the factory with refrigerant R290 (propane). 6.4.1 Escaping refrigerant can lead to fire and explosions that result in very serious…
- 页 9p. 9
- 页 10p. 10
Fig 5 . 2. Product Introduction Information 2.1 Term Please refer to the appendix for specific details. 2.2 System operation schematic diagram When cleaning…
- 页 11p. 11
Serial Number Name Y01 Internal principles of the unit Y02 Compressor Y03 Exhaust temperature sensor Y04 Crankshaft heating strip Y05 High pressure switch Y06…
- 页 12p. 12
2 4 Heat pump installation A heat pump can heat or cool your room through a heating system and heat up your home’s hot water. Your heating contractor will…
- 页 13p. 13
2.6.4 Date and time The date and time are set by the factory. You can change the settings at any time to meet your personal needs.If there is a power failure…
- 页 14p. 14
3. System operation instructions 3.1 Working principle of wire controller All of your system settings can be done through a remote control unit or other room…
- 页 15p. 15
The top of the main interface displays from left to right: yearmonth -day, time, ambient temperature, cascade, night mode, silent, holiday, timer…
- 页 16p. 16
3.8 Display instructions and setting methods for each interface of the Controller 3.8.1 Mode selection When the homepage is on, press the key (or press “ on…
- 页 17p. 17
3.8.3 Function selection Under the menu page, press the key to enter the function selection page. Press the back button or home button in the bottom left…
- 页 18p. 18
3.8.3.2 On the function selection page, press to select the silent mode. First, select the maximum operating frequency of the compressor and fan, and then turn…
- 页 19p. 19
3.8.3.4 On the function selection page, press to select the hybrid mode. When the ambient temperature is lower than the set temperature, the gas will be turned…
- 页 20p. 20
3.8.3.6 On the function selection page, press to select the water temperature setting, and you can choose from three water temperature setting methods: Fixed…
- 页 21p. 21
Fixed: Temperature needs to be set on the main interface by oneself OTC point: Determine the coordinate curve by setting the minimum ambient temperature…
- 页 22p. 22
3.8.3.8 On the function selection page, press to select the user mode, and you can choose to enable "manual defrosting", "manual activation of electric…
- 页 23p. 23
3.8.3.10 On the function selection page, press to select the timing mode, and you can choose the time period from Monday to Sunday for the scheduled opening.…
- 页 24p. 24
3.8.3.12 On the function selection page, press to select the hot water setting, and you can choose whether to require hot water mode and whether hot water is…
- 页 25p. 25
3.8.3.14 On the function selection page, press to select the machine model settings. Function selection - Machine model setting “ ” 3.8.3.15 On the function…
- 页 26p. 26
3.8.3.17 Function Selection - Floor Drying On the function selection page, press“ ”Select floor drying, you can choose different operating curves (A-F) and…
- 页 27p. 27
3.8.4 Under the menu page, press the key to enter the query selection function page. Press the back button or home button in the bottom left corner to return…
- 页 28p. 28
3.8.4.2 On the query page, press the key to enter the real-time fault query page, where you can query the real-time fault information of the machine. Real time…
- 页 29p. 29
3.8.4.4 On the query page, press the key to enter the running curve page, where you can query the machine's information curve, including inlet temperature…
- 页 30p. 30
3.8.5 Under the menu page, press the key to enter the settings selection page. Press the back button or home button in the bottom left corner to return to the…