ASUS PB60-BP667ZD (90MS01E1-M06680) user manual

Contents

1. About this manualp. 5

   This manual provides information about the hardware and software features of your Mini PC, organized through the following chapters: Chapter 1: Getting to know…

2. Conventions used in this manualp. 6

   To highlight key information in this manual, some text are presented as follows: IMPORTANT! This message contains vital information that must be followed to…

3. Getting to know your Mini PCp. 9
4. Featuresp. 10

   Front view USB 3.1 Gen 1 port The USB 3.1 Gen 1 (Universal Serial Bus) port provides a transfer rate up to 5 Gbit/s. These ports also support the Battery…

5. Using your Mini PCp. 15
6. Getting startedp. 16

   stand screws Mounting your PC on the stand To mount your PC on the stand: 1. Locate the mounting holes at the bottom of your PC. 2. Align the stand’s mounting…

7. Turning your Mini PC offp. 23

   If your Mini PC is unresponsive, press and hold the power button for at least four (4) seconds until your Mini PC turns off

8. Putting your Mini PC to sleepp. 23

   To put your Mini PC on Sleep mode, press the Power button once

9. Entering the BIOS Setupp. 23

   BIOS (Basic Input and Output System) stores system hardware settings that are needed for system startup in the Mini PC. In normal circumstances, the default…

10. Upgrading your Mini PCp. 25
11. Removing the top coverp. 26

    1. Turn off your Mini PC then disconnect all cables and peripherals. 2. Remove the screw from the rear (A), then push the top cover towards the front to remove…

12. Replacing the top coverp. 27

    Replace the top cover and push it towards the rear, then secure it with the screw removed previously.

13. Installing 2.5” HDD or SSDp. 28

    1. Remove the four (4) screws, then lift the storage bay to remove it from the chassis.

14. Installing the M.2 SSD (on selected models)p. 30

    (optional) Remove the storage bay if a storage bay is installed. Follow step 2 under the Installing 2.5” HDD or SSD section to remove the storage bay.

15. Installing top memory modulep. 32

    IMPORTANT! • Refer to http://www.asus.com for the list of compatible DIMMs. You can only install DDR4 SO-DIMMs to the Mini PC’s DIMM slot. • Only…

16. Installing an external buttonp. 34

    1. Remove the metal cover of the external button port. CAUTION! Take extra care when removing the metal cover. Use tools such as a screw driver to bend and…

17. Appendixp. 35
18. Safety informationp. 36

    Your Mini PC is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is…

19. Regulatory noticesp. 38

    REACH Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) regulatory framework, we publish the chemical substances…

20. ASUS contact informationp. 43

    ASUSTeK COMPUTER INC. Address 4F, No. 150, Li-Te Road, Peitou, Taipei 112, Taiwan Telephone +886-2-2894-3447 Fax +886-2-2890-7798 Web site www.asus.com…