Loading manual…
Loading manual…
Read these instructions completely and carefully. • IMPORTANT — Save these instructions for local inspector’s use. • IMPORTANT — Observe all governing codes…
ELECTRICAL REQUIREMENTS This appliance must be supplied with the proper voltage and frequency and connected to an individual, properly grounded branch circuit…
Remove Installation Instructions from literature pack and read them carefully before you begin. Be sure to place all literature, Use and Care, Installations…
LOCATE ELECTRICAL OUTLET AND GAS SHUT-OFF VALVE BENEATH CABINET Install a manual shut-off valve in the gas line in an easily accessible location outside the…
PROVIDE ADEQUATE GAS SUPPLY This cooktop is designed to operate on natural gas at 4″ of water column manifold pressure and 7″ of water column (W.C.) supply…
EXTENSION CORDS Because of potential safety hazards under certain conditions, we strongly recommend against the use of an extension cord. However, if you still…
ASSEMBLING THE COOKTOP BURNERS The electrode of the spark igniter is exposed. Be careful not to push any cooktop controls while the top of the burner is…
Make sure all controls are left in the OFF position. Check to be sure the cooktop is in the UNLOCKED position (on models so equipped). Make sure the flow of…
SAFETY INFORMATION YOU SHOULD KNOW The pressure regulator and burner orifices are set for natural gas. To use Propane Gas, the regulator and burner orifices…