Loading manual…
Loading manual…
Accessories that came with this product have been designed and verified for the use in connection with this product. Never use accessories from other products…
Power button Thunderbolt™ 4 port Headphone/Headset/ Microphone jack DisplayPort USB 20Gbps Type-C ® port HDMI™ port USB 10Gbps port Power input USB 10Gbps port…
LAN port LED indications: Link LED Speed LED Speed LED Status Description OFF 100 Mbps / 10 Mbps connection YELLOW 1 Gbps connection GREEN 2.5 Gbps connection…
NOTE: To view the current power management settings in Windows ® 11, click the Start Button. Type Power Management, then press <Enter>. Default settings on a…
Putting your NUC system to the Off mode with fast startup enabled You can put your NUC system to the Off mode with fast startup enabled: Enter Control Panel in…
You can shut down the your NUC system with fast startup enabled. To enable fast startup in Shutdown settings: Enter Control Panel in the search bar and open it…
IMPORTANT! ASUS is not responsible for direct, indirect, intentional or unintentional damages resulting from improper installation and operation. NOTE: The…
This device is intended for use in ambient temperatures between 0°C and 35°C (32°F and 95°F). Avoid using or storing next to heat sources, in direct sunlight…
Do not walk on the power cord or allow anything to rest on it. • Do not spill water or any other liquids on your system. • When the system is turned off, a…
1. Read the entire manual before starting any service procedures and follow all instructions. 2. Back up your NUC system. 3. Turn off your NUC system. 4. Place…
1. Completely loosen the thumbscrew securing the main cover.
1. Align the small space at the bottom edge of the DDR5 CSODIMM with the key on the SO-DIMM slot, then insert the DDR5 CSODIMM into the SO-DIMM slot. 2. Push…
2280 M.2 bracket A 2280 M.2 bracket comes bundled with your system, we recommend installing the PCIe Gen5x4 M.2 SSD to the bracket before installing the PCIe…
1. Align the main cover to the system chassis, then push the main cover towards the front of the system. Make sure the rear IO openings are properly aligned to…