LG 43UD79 user manual

Contents

1. LICENSEp. 3

   Each model has different licenses. Visit www.lg.com for more information on the license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the…

2. ASSEMBLING AND PREPARINGp. 4

   Product Components Please check whether all the components are included in the box before using the product. If there are missing com­ ponents, contact the…

3. Product Componentsp. 4

   Please check whether all the components are included in the box before using the product. If there are missing com­ ponents, contact the retail store where you…

4. Supported Drivers and Softwarep. 5

   Check the drivers and software supported by your product and refer to the manuals on the CD enclosed in the product package. y y Required and Recommended: You…

5. Component and Button Descriptionp. 6

   Power LED y y On: power is on y y Off: power is off Joystick Button y y The joystick button is located at the bottom of the monitor. NOTE 43UD79 y y IR Receiver

6. Input Connectorp. 8
7. Moving and Lifting the Monitorp. 10

   When moving or lifting the monitor, follow these in­ structions to prevent the monitor from being scratched or damaged and to ensure safe transportation…

8. Installing the Monitorp. 11

   Assembling the stand base y y To avoid injury to the fingers and foot when Assembly Stand Body and Base, should hold Base when assem-bly stand body and base. y…

9. REMOTE CONTROLp. 18

   The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install…

10. USING THE MONITORp. 19

    Connecting to a PC y y This monitor supports the *Plug and Play feature. *Plug and Play: A feature that allows you to add a device to your computer without…

11. Connecting to a PCp. 19

    y y This monitor supports the *Plug and Play feature. *Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure…

12. Connecting to AV Devicesp. 20

    HDMI connection Transmits the digital video and audio signals from your PC and A/V devices to the monitor. Connect your PC and AV device to the monitor with…

13. Connecting Peripheralsp. 21

    USB Cable connection - PC The USB port on the product functions as a USB hub. Please connect the USB C-C cable to the PC. y y Make sure to install the most…

14. Connecting to External Devicesp. 22

    Connecting Headphones Connect peripherals to the monitor via the headphones port. Connect as illustrated. y y Peripheral devices are sold separately. y y If…

15. User Settingsp. 23

    Button Menu Status Description Main menu disabled Enables the main menu. Main menu enabled Exits the main menu. (Holding down the button to turn off the…

16. Activating the Main Menup. 23

    Press the joystick button on the bottom of the monitor. 2 Move the joystick up/down (▲/▼) and left/right(◄/►) to set the options. 3 Press the joystick button…

17. User Settingsp. 24

    Menu Settings 1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. 2 Configure the options by moving the…

18. TROUBLESHOOTINGp. 29

    Nothing is displayed on the screen. Is the monitor's power cord plugged in? y y Check if the power cord is correctly plugged into the power outlet. Is the…

19. Factory Support Mode (Preset Mode, PC)p. 33
20. HDMIp. 33

    Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) Remarks 640 x 480 31.469 59.94 -/- 800 x 600 37.879 60.317 +/+ 1024 x…

21. DisplayPort / USB-Cp. 34
22. HDMI Timing (Video)p. 35

    Factory support mode (Preset Mode) Horizontal Frequency(kHz) Vertical Frequency(Hz) Remarks 480p 31.5 60 720p 45.0 60 1080p 67.5 60 2160p 135 60 When HDMI…

23. Power LEDp. 35

    Mode LED Color On Mode White (For a few seconds) Sleep Mode Off Off Mode Off

24. EXTERNAL CONTROL DEVICE SETUPp. 36

    Communication Parameters Baud rate : 9600 bps (UART) Data length : 8 bits Parity : None Stop bit : 1 bit Communication code : ASCII code Use a crossed…

25. Communication Parametersp. 36

    Baud rate : 9600 bps (UART) Data length : 8 bits Parity : None Stop bit : 1 bit Communication code : ASCII code Use a crossed (reverse) cable. Transmission…