Sharp PN-V701 user manual

Contents

1. IMPORTANT INFORMATIONp. 3
2. DEAR SHARP CUSTOMERp. 4
3. SAFETY PRECAUTIONSp. 4

   carefully before using this product. SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and…

4. TIPS AND SAFETY INSTRUCTIONSp. 6
5. MOUNTING PRECAUTIONSp. 7

   This product is for use indoors. • A VESA-compliant mounting bracket is required. • Since the monitor is heavy, consult your dealer before installing, removing…

6. Supplied Componentsp. 8
7. Part Namesp. 9
8. Connecting Peripheral Equipmentp. 11

   Caution • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the…

9. Connecting the Power Cordp. 15

   Caution • Use only the power cord supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal.…

10. Binding Cablesp. 16

    The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp. Insert the cable clamp into the cable clamp attachment…

11. Preparing the Remote Control Unitp. 17

    Installing the batteries 1. Place your finger on the part marked with the ▲, and then pull the cover off. 2. See the instructions in the compartment and put in…

12. Turning Power On/Offp. 18

    Press the POWER button to turn the power ON/OFF. You can also turn the power ON/OFF by pressing the MONITOR ON button/MONITOR OFF button on the remote control…

13. Basic Operationp. 20

    When performing operation of multiple monitors with the remote control unit, first set the remote control unit to the appropriate remote control mode (see page…

14. Remote Control Modep. 23

    With the remote control unit it’s possible to perform operation of... • The primary monitor • Monitors with a specified ID No. • All primary/secondary monitors…

15. Menu Itemsp. 24

    Displaying the menu screen Video adjustment and settings of various functions are enabled. This section describes how to use the menu items. See pages 25 to 36…

16. Initialization (Reset)/Functional Restriction Setting (FUNCTION)p. 37

    OSD DISPLAY Shows/hides the menu, modes and messages. The FUNCTION and REMOTE CONTROL MODE screens cannot be hidden. ON 1 ��������������Shows all menus, modes…

17. Controlling the Monitor with a computer (RS-232C)p. 38

    You can control this monitor from a computer via RS-232C (COM port) on the computer. You can also connect multiple monitors via a daisy chain by using a…

18. Controlling the Monitor with a computer (LAN)p. 51

    Settings to connect to a LAN Set the monitor’s IP address and subnet mask to match the settings of your LAN. These settings can be made on either the monitor…

19. Troubleshootingp. 61

    If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or…

20. Specificationsp. 63

    nProduct Specifications Model PN-V701 LCD component 70" Class [69-1/2 inch (176.6cm) diagonal] TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors Approx.…

21. Mounting Precautions (For SHARP dealers and service engineers)p. 69