ASUS PN41-BBC129MVS1 (90MR00I1-M000B0) user manual

Contents

1. About this manualp. 5

   This manual provides information about the hardware and software features of your Mini PC, organized through the following chapters: Chapter 1: Getting to know…

2. Conventions used in this manualp. 6

   To highlight key information in this manual, some text are presented as follows: IMPORTANT! This message contains vital information that must be followed to…

3. Getting to know your Mini PCp. 9
4. Featuresp. 10

   Front view Power button The power button allows you to turn the Mini PC on or off. You can use the power button to put your Mini PC to sleep mode or press it…

5. Using your Mini PCp. 19
6. Getting startedp. 20

   Connect the AC power adapter to your Mini PC To connect the AC power adapter to your Mini PC: A. Connect the power cord to the AC power adapter. B. Connect the…

7. Turning your Mini PC offp. 28

   If your Mini PC is unresponsive, press and hold the power button for at least four (4) seconds until your Mini PC turns off

8. Putting your Mini PC to sleepp. 28

   To set your Mini PC to enter Sleep mode by pressing the Power button once, search for Control Panel in the Windows Search Box, then navigate to Hardware and…

9. Entering the BIOS Setupp. 28

   BIOS (Basic Input and Output System) stores system hardware settings that are needed for system startup in the Mini PC. In normal circumstances, the default…

10. Upgrading your Mini PCp. 31
11. Removing the bottom coverp. 32

    1. Turn off your Mini PC then disconnect all cables and peripherals. 2. Place the Mini PC on a flat stable surface, with its top side facing down. 3. Remove…

12. Replacing the bottom coverp. 33

    Push the bottom cover from the right side towards the left side of the Mini PC (A), then secure it using the four (4) screws removed previously (B).

13. Installing memory modulesp. 34

    Your Mini PC comes with two SO-DIMM memory slots that allow you to install two DDR4 SO-DIMMs. Align and insert the memory module into the slot (A) and press it…

14. Installing 2.5” HDD or SSDp. 35

    1. Prepare your 2.5” HDD or SSD, then align it with the storage bay on the bottom cover of your Mini PC. 2. Insert your HDD or SSD into the storage bay (A)…

15. Installing the M.2 SSD (on selected models)p. 36

    1. Align and insert the 2280 M.2 SSD into its slot inside the Mini PC. 2. Gently push down the 2280 M.2 SSD on top of the screw hole and fasten it using one of…

16. Installing the wireless cardp. 37

    NOTE: Your Mini PC includes a M.2 slot for 2230 wireless and Bluetooth modules. Refer to http://www.asus.com for the list of compatible wireless and Bluetooth…

17. Appendixp. 39
18. Safety informationp. 40

    Your Mini PC is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is…

19. Regulatory noticesp. 42

    COATING NOTICE IMPORTANT! To provide electrical insulation and maintain electrical safety, a coating is applied to insulate the device except on the areas…