Sharp PN-80TC3 user manual

Contents

1. IMPORTANT INFORMATIONp. 3
2. DEAR SHARP CUSTOMERp. 4
3. SAFETY PRECAUTIONSp. 4

   carefully before using this product. SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and…

4. TIPS AND SAFETY INSTRUCTIONSp. 6
5. MOUNTING PRECAUTIONSp. 7

   This product is for use indoors. • A mounting bracket compliant with VESA specifications is required. • Since the monitor is heavy, consult your dealer before…

6. Supplied Componentsp. 9

   If any components are missing, please contact your dealer.  Liquid Crystal Display Monitor: 1  Remote control unit: 1  Power cord  Remote control unit…

7. System Requirementsp. 9

   Computer PC/AT compatible computer with a USB 2.0 port and able to output a resolution of 1920 x 1080. (CD-ROM drive required for software installation.) OS…

8. Part Namesp. 10
9. Connecting Peripheral Equipmentp. 12

   Caution • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the…

10. Connecting the Power Cordp. 14

    Caution • Use only the power cord supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal.…

11. Binding Cablesp. 14

    Main power switch 1 AC input terminal 2 Power cord (Supplied) For power outlet 3 Cable Cable clamp (insertion type) *1 *2 Cable clamp Cable Cable clamp…

12. Preparing the Remote Control Unitp. 15

    Installing the batteries 1. Press the cover gently and slide it in the direction of the arrow. 2. See the instructions in the compartment and put in the…

13. Removing the Handlesp. 16

    Mounting a web camera The handles can be removed. Handle Handle screws Caution • The removable handles and handle screws are for use with this monitor. Do not…

14. Mounting a web camerap. 16

    The handles can be removed. Handle Handle screws Caution • The removable handles and handle screws are for use with this monitor. Do not use them for any other…

15. Turning Power On/Offp. 17

    Turning power off Turning power off with monitor buttons POWER button 1. Touch the POWER button. The recognition screen appears. 2. Touch [OK]. The power is…

16. Touch Panel / Touch Pen Preparationsp. 19

    Connecting the touch pen adapter To use the touch pen, insert the touch pen adapter into the touch pen adapter port on the monitor. Touch pen adaptor Touch pen…

17. Touch actionp. 21

    s that can be used with this monitor differ according to operating system and application. The functions of touch actions are also different. For details…

18. Basic Operationp. 24

    Using the touch menu You can touch the monitor to change input mode, volume, and other settings. 1. Touch the TOUCH MENU button. TOUCH MENU button 2. Touch…

19. Menu Itemsp. 27

    Displaying the menu screen Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu items. See…

20. Initialization (Reset)/Functional Restriction Setting (FUNCTION)p. 39

    OSD DISPLAY Shows/hides the menu, modes and messages. The FUNCTION screen cannot be hidden. ON 1 ��������������Shows all menus, modes and messages. ON 2…

21. Controlling the Monitor with a PC (RS-232C)p. 40

    You can control this monitor from a PC via RS-232C (COM port) on the PC. TIPS • To control the monitor via RS-232C, set RS-232C/LAN SELECT to RS-232C. • When…

22. Controlling the Monitor with a PC (LAN)p. 51

    Settings to connect to a LAN Set the monitor’s IP address and subnet mask to match the settings of your LAN. These settings can be made on either the monitor…

23. Troubleshootingp. 60

    If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or…

24. Specificationsp. 62

    nProduct Specifications Model PN-80TC3 LCD component 80" Class [80 inch (203.2cm) diagonal] TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors Approx.…

25. Mounting Precautions (For SHARP dealers and service engineers)p. 67