GE PNSF31Z user manual

Contents

1. Important Installation Recommendationsp. 1

   Plan How You Will Install the Softener 2 Where to Install the Softener 2 Tools and Materials Required for Installation 2

2. Plan How You Will Install the Softenerp. 2

   You must first decide how to run in and out pipes to the softener. Look at the house main water pipe at the point where you will connect the softener. Is the…

3. Where to Install the Softenerp. 2
4. Tools and Materials Required for Installationp. 2

   Place the softener as close as possible to a sewer drain, or other acceptable drain point or standpipe. • It is recommended to keep outside faucets on hard…

5. Step-by-Step Installation Instructionsp. 1

   — Bypass valve 4 — Softener assembly 4 — Plumb piping 4 — Brine tank overflow fittings 4 — Valve drain hose 4, 5 — Connecting brine tank overflow hose 5 —…

6. Bypass valvep. 4

   Remove plastic shipping plug and wire from valve outlet. • Push the bypass valve (lubricate o-ring seals with silicone grease) into both ports of the valve as…

7. Softener assemblyp. 4

   INTO INSTALLATION POSITION: • Be sure the installation surface is level and smooth. Sharp objects under the tank may puncture it. If needed, place the tank on…

8. Plumb pipingp. 4
9. Brine tank overflow fittingsp. 4

   Insert the rubber grommet into the 3/4″ diameter hole in the brine tank sidewall as shown in Fig. 5. • Push the end of the hose adapter elbow into the grommet…

10. Valve drain hosep. 4

    Use the provided drain hose (20′ length included) to attach to the valve drain fitting. To keep water pressure from blowing the hose off, use a hose clamp to…

11. Connecting brine tank overflow hosep. 5

    5A. CONNECTING A RIGID VALVE DRAIN TUBE • To adapt a copper drain tube to the softener, use a hacksaw to cut the barbed end from the drain fitting as shown in…

12. Grounding clamps and wiresp. 5
13. Testing for water leaksp. 5
14. Programming the controlp. 6
15. Specifications/Dimensionsp. 7

    Rated Capacity Amount of high capacity resin (lbs/cu. ft) Resin tank nominal size (in., dia. x height) Service flow rate (gpm) Water supply maximum hardness…

16. Parts Listp. 8

Other documents for this model

• GE PNSF31Z user manual
• GE GNSF23Z user manual
• GE GNSF18Z user manual