Sharp PN-V600A user manual

Contents

1. IMPORTANT INFORMATIONp. 3
2. DEAR SHARP CUSTOMERp. 5
3. SAFETY PRECAUTIONSp. 5

   carefully before using this product. SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and…

4. TIPS AND SAFETY INSTRUCTIONSp. 7
5. MOUNTING PRECAUTIONSp. 8

   This product is for use indoors. • A mounting bracket compliant with VESA specifications is required. • Since the monitor is heavy, consult your dealer before…

6. Supplied Componentsp. 9
7. Part Namesp. 10
8. Connecting Peripheral Equipmentp. 12
9. Preparing the Remote Control Unitp. 15

   Installing the batteries 1. Press the cover gently and slide it in the direction of the arrow. 2. See the instructions in the compartment and put in the…

10. Connecting the Power Cordp. 15

    Caution • Use only the power cord supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal.…

11. Binding Cablesp. 16

    The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamps. Insert the cable clamp into the cable clamp attachment…

12. Removing the Handlesp. 16

    The handles can be removed. The removed handles can be attached on the side. 1. Remove the handle screws and remove the handles and handle spacers. 2. Pass the…

13. Affixing the Protection Coversp. 16

    After installing the monitor, affix the protection covers (4 pieces) as necessary. Protection cover Protection cover

14. Turning Power On/Offp. 17

    Caution • Turn on the monitor first before turning on the PC or playback device. Turning on the main power Main power switch Caution • The main power must be…

15. Basic Operationp. 18

    When performing operation of multiple monitors with the remote control unit, first set the remote control unit to the appropriate remote control mode (see page…

16. Remote Control Modep. 21

    With the remote control unit it’s possible to perform operation of... • The primary monitor • Monitors with a specified ID No. • All primary/secondary monitors…

17. Menu Itemsp. 22

    Displaying the menu screen Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu items. See…

18. Initialization (Reset)/Functional Restriction Setting (FUNCTION)p. 31
19. Controlling the Monitor with a PC (RS-232C)p. 32

    You can control this monitor from a PC via RS-232C (COM port) on the PC. You can also connect multiple monitors via a daisy chain by using a PC. By assigning…

20. Controlling the Monitor with a PC (LAN)p. 45

    Settings to connect to a LAN Set the monitor’s IP address and subnet mask to match the settings of your LAN. These settings can be made on either the monitor…

21. Troubleshootingp. 53

    If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or…

22. Specificationsp. 55

    nPN-V600A Product Specifications Model PN-V600A LCD component 60" Class [60 inch (152.4cm) diagonal] TFT LCD Max. resolution (pixels) 1366 x 768 Max. colors…

23. Mounting Precautions (For SHARP dealers and service engineers)p. 60

    When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people. • Be sure to use a wall-mount bracket designed or…