Sharp PN-E803 user manual

Contents

1. IMPORTANT INFORMATIONp. 3
2. DEAR SHARP CUSTOMERp. 4
3. SAFETY PRECAUTIONSp. 4

   carefully before using this product. SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and…

4. TIPS AND SAFETY INSTRUCTIONSp. 6
5. MOUNTING PRECAUTIONSp. 7

   This product is for use indoors. • A mounting bracket compliant with VESA specifications is required. • Since the monitor is heavy, consult your dealer before…

6. Supplied Componentsp. 8
7. Part Namesp. 9
8. Connecting Peripheral Equipmentp. 11

   Caution • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the…

9. Connecting the Power Cordp. 13

   Caution • Use only the power cord supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal.…

10. Binding Cablesp. 14
11. Removing the Handlesp. 14

    The handles can be removed. Handle Handle screws Caution • The removable handles and handle screws are for use with this monitor. Do not use them for any other…

12. Preparing the Remote Control Unitp. 15

    Installing the batteries 1. Press the cover gently and slide it in the direction of the arrow. 2. See the instructions in the compartment and put in the…

13. Turning Power On/Offp. 16

    Press the POWER button or POWER switch to turn the power ON/OFF. Power switch Power LED Status Status of the monitor Green lit Power on Orange lit Power off…

14. Basic Operationp. 18

    1 3 4 8 7 2 10 9 6 1. INPUT (Input mode selection) The menu is displayed. Press or to select the input mode, and press ENTER to enter. * You can select the…

15. Menu Itemsp. 20

    Displaying the menu screen Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu items. See…

16. Initialization (Reset)/Functional Restriction Setting (FUNCTION)p. 32

    OSD DISPLAY Shows/hides the menu, modes and messages. The FUNCTION screen cannot be hidden. ON 1 ��������������Shows all menus, modes and messages. ON 2…

17. Controlling the Monitor with a PC (RS-232C)p. 33

    You can control this monitor from a PC via RS-232C (COM port) on the PC. You can also connect multiple monitors via a daisy chain by using a PC. By assigning…

18. Controlling the Monitor with a PC (LAN)p. 45

    Settings to connect to a LAN Set the monitor’s IP address and subnet mask to match the settings of your LAN. These settings can be made on either the monitor…

19. Troubleshootingp. 54

    If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or…

20. Specificationsp. 56

    nProduct Specifications Model PN-E803 LCD component 80" Class [80 inch (203.2cm) diagonal] TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors Approx.…

21. Mounting Precautions (For SHARP dealers and service engineers)p. 62

Other documents for this model

• Sharp PN-E803 user manual