JBL 810 (JBLQ810WLBLK) user manual

Contents

1. Introductionp. 3

   Congratulations on your purchase! This manual includes information on the JBL QUANTUM810 WIRELESS gaming headset. We encourage you to take a few minutes to…

2. What’s in the boxp. 4
3. PRODUCT OVERVIEWp. 5
4. Controls on headsetp. 5
5. Controls on 2.4G USB wireless donglep. 7

   02 01 CONNECT button • Hold for more than 5 seconds to enter 2.4G wireless pairing mode. 02 LED • Indicates the status of 2.4G wireless connection

6. Controls on 3.5mm audio cablep. 7

   02 01 slider • Slide to mute or unmute the microphone in 3.5mm audio connection. 02 Volume dial • Adjusts headset volume in 3.5mm audio connection.

7. Getting startedp. 8

   Charging your headset 3.5hr Before use, fully charge your headset through the supplied USB-A to USB-C charging cable. TIPS: • It takes approximately 3.5 hours…

8. Charging your headsetp. 8

   3.5hr Before use, fully charge your headset through the supplied USB-A to USB-C charging cable. TIPS: • It takes approximately 3.5 hours to fully charge the…

9. Wearing your headsetp. 9

   1. Put the side marked L onto your left ear and the side marked R onto your right ear. 2. Adjust the earpads and headband for a comfortable fit. 3. Adjust the…

10. Power onp. 10

    Slide the power switch upwards to power on the headset. • Slide downwards to power off. The status LED glows solid white upon powering on

11. First-time setup (for PC only)p. 10

    Download from jblquantum.com/engine to gain full access to features on your JBL Quantum headset - from headset calibration to adjusting 3D audio to suit your…

12. Using your headsetp. 12

    With 3.5mm audio connection 1. Connect the black connector to your headset. 2. Connect the orange connector to the 3.5mm headphone jack on your PC, Mac, mobile…

13. With 3.5mm audio connectionp. 12

    1. Connect the black connector to your headset. 2. Connect the orange connector to the 3.5mm headphone jack on your PC, Mac, mobile or gaming console device.…

14. With 2.4G wireless connectionp. 13

    2.4G 1. Plug the 2.4G USB wireless dongle into a USB-A port on your PC, Mac, PS4/PS5 or Nintendo Switch™. 2. Power on the headset. It will pair and connect…

15. With Bluetooth (secondary connection)p. 15

    Settings Bluetooth Bluetooth DEVICES JBL Quantum810 Wireless Now Discoverable Connected ON 01 02 >2S With this function, you can connect your mobile phone to…

16. Product Specificationsp. 17

    Driver size: 50 mm Dynamic drivers • Frequency response (Passive): 20 Hz - 40 kHz • Frequency response (Active): 20 Hz - 20 kHz • Microphone frequency…

17. Troubleshootingp. 18

    If you have problems using this product, check the following points before you request service. No power • The headset turns off automatically after 10 minutes…

18. Licensep. 20

    The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries…