TP-Link JetStream (TL-SL2428) user manual

Contents

1. Chapter 1 About this Guidep. 9

   This User Guide contains information for setup and management of TL-SL2210/TL-SL2218 /TL-SL2428/TL-SL2452 Smart Switch. Please read this guide carefully before…

2. Chapter 2 Introductionp. 12

   Thanks for choosing the TL-SL2210/TL-SL2218/TL-SL2428/TL-SL2452 Smart Switch! 2.1 Overview of the Switch Designed for workgroups and departments…

3. Chapter 3 Login to the Switchp. 16

   3.1 Login 1) To access the configuration utility, open a web-browser and type in the default address http://192.168.0.1 in the address field of the browser…

4. Chapter 4 Systemp. 18

   The System module is mainly for system configuration of the switch, including four submenus: System Info, User Manage, System Tools and Access Security. 4.1…

5. Chapter 5 Switchingp. 41

   Switching module is used to configure the basic functions of the switch, including four submenus: Port, LAG, Traffic Monitor and MAC Address. 5.1 Port The Port…

6. Chapter 6 VLANp. 65

   The traditional Ethernet is a data network communication technology based on CSMA/CD (Carrier Sense Multiple Access/Collision Detect) via shared communication…

7. Chapter 7 Spanning Treep. 71

   STP (Spanning Tree Protocol), subject to IEEE 802.1D standard, is to disbranch a ring network in the Data Link layer in a local network. Devices running STP…

8. Chapter 8 Multicastp. 91

    Multicast Overview In the network, packets are sent in three modes: unicast, broadcast and multicast. In unicast, the source server sends separate copy…

9. Chapter 9 QoSp. 107

   QoS (Quality of Service) functions to provide different quality of service for various network applications and requirements and optimize the bandwidth…

10. Chapter 10 ACLp. 123

    10.1 ACL Config An ACL may contain a number of rules, and each rule specifies a different package range. Packets are matched in match order. Once a rule is…

11. Chapter 11 SNMPp. 133

     SNMP Overview SNMP (Simple Network Management Protocol) has gained the most extensive application on the UDP/IP networks. SNMP provides a management frame to…

12. Chapter 12 Maintenancep. 148

    Maintenance module, assembling the commonly used system tools to manage the switch, provides the convenient method to locate and solve the network problem. （1）…

13. Appendix A: Specificationsp. 157

    Standards IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-TX/100Base-FX Fast Ethernet IEEE802.3ab 1000Base-T Gigabit Ethernet IEEE802.3z 1000Base-X Gigabit…

14. Appendix B: Glossaryp. 159

    Boot Protocol (BOOTP) BOOTP is used to provide bootup information for network devices, including IP address information, the address of the TFTP server that…