Gigabyte Z490 AORUS ULTRA G2 (Z490 AORUS ULTRA-GU) user manual

Contents

1. Z490 AORUS ULTRA Motherboard Layoutp. 4
2. Z490 AORUS ULTRA Motherboard Block Diagramp. 5

   Center/Subwoofer Speaker Out Line Out MIC Line In S/PDIF Out Rear Speaker Out CODEC LGA1200 CPU CPU CLK+/- (100~500 MHz) PCI Express 3.0 Bus DMI 3.0 LPC Bus…

3. Chapter 1 Hardware Installationp. 6

   1-1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of…

4. 1-1 Installation Precautionsp. 6

   The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to…

5. 1-2 Product Specificationsp. 7

   CPU Š Š Support for 10th Generation Intel® Core™ i9 processors/Intel® Core™ i7 processors/ Intel® Core™ i5 processors/Intel® Core™ i3 processors/Intel®…

6. 1-3 Installing the CPUp. 11

   Read the following guidelines before you begin to install the CPU: • Make sure that the motherboard supports the CPU. (Go to GIGABYTE's website for the latest…

7. 1-4 Installing the Memoryp. 11
8. 1-5 Installing an Expansion Cardp. 12

   Read the following guidelines before you begin to install an expansion card: • Make sure the motherboard supports the expansion card. Carefully read the manual…

9. 1-6 Setting up AMD CrossFire™/NVIDIA® SLI™ Configurationp. 12

   A. System Requirements -- Windows 10 64-bit operating system -- A CrossFire/SLI-supported motherboard with two or more PCI Express x16 slots and correct driver…

10. 1-7 Back Panel Connectorsp. 13

    USB 2.0/1.1 Port The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices. SMA Antenna Connectors (2T2R) Use this connector to…

11. 1-8 Internal Connectorsp. 15

    Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. •…

12. Chapter 2 BIOS Setupp. 26

    Because BIOS flashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is recommended that you not flash the BIOS.…

13. 2-1 Startup Screenp. 26

    The following startup Logo screen will appear when the computer boots. (Sample BIOS Version: T0d) Function Keys • When the system is not stable as usual…

14. 2-2 The Main Menup. 27

    Advanced Mode Function Keys <f><g> Move the selection bar to select a setup menu <h><i> Move the selection bar to select an configuration item on a menu…

15. 2-3 Favorites (F11)p. 28

    Set your frequently used options as your favorites and use the <F11> key to quickly switch to the page where all of your favorite options are located. To add…

16. 2-4 Tweakerp. 29
17. 2-5 Settingsp. 34

    ƒƒ Platform Power & & Platform Power Management Enables or disables the Active State Power Management function (ASPM). (Default: Disabled) & & PEG ASPM Allows…

18. 2-6 System Infop. 39

    This section provides information on your motherboard model and BIOS version. You can also select the default language used by the BIOS and manually set the…

19. 2-7 Bootp. 40

    & & Bootup NumLock State Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST. (Default: On) & & Security Option Specifies…

20. 2-8 Save & Exitp. 43

    & & Save & Exit Setup Press <Enter> on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press <Esc>…

21. Chapter 3 Appendixp. 44

    Before you begin, please prepare the following items: • At least two SATA hard drives or SSDs. (Note 1) (To ensure optimal performance, it is recommended that…

22. 3-1 Configuring a RAID Setp. 44

    RAID Levels (Note 1) An M.2 PCIe SSD cannot be used to set up a RAID set either with an M.2 SATA SSD or a SATA hard drive. (Note 2) Refer to "Internal…

23. 3-2 Installing an Intel® Optane™ Memoryp. 46

    System Requirements 1. Intel® Optane™ memory 2. The Optane™ memory must have at least 16 GB capacity, and it must have equal or smaller capacity than the hard…

24. 3-3 Drivers Installationp. 48

    Please visit GIGABYTE's website for more troubleshooting information. - 48 -

25. 3-4 Debug LED Codesp. 49

    Code Description 10 PEI Core is started. 11 Pre-memory CPU initialization is started. 12~14 Reserved. 15 Pre-memory North-Bridge initialization is started.…

26. Regulatory Noticesp. 53

    CAUTION: The manufacturer is not responsible for any interference caused by unauthorized modifications and/or use of unauthorized antennas. Such changes and/or…

27. Contact Usp. 56

    GIGA-BYTE TECHNOLOGY CO., LTD. Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, Taiwan TEL: +886-2-8912-4000, FAX: +886-2-8912-4005 Tech. and…