Fisher & Paykel REFRIGERATOR-FREEZER (RS80A) installation instructions

Contents

1. Safety and warningsp. 4

   ! WARNING! Electric Shock Hazard Failure to follow this advice may result in electrical shock or death. • Read and follow the safety and warnings outlined in…

2. Supplied partsp. 5

   Anti-tip bracket assembly kit Anti-tip bracket (1x) Masonry plug (4x) #10x40 cross-head screw (4x) Door panel attachment kit Side bracket (10x) Side strap…

3. Toolsp. 6

   SUPPLIED TOOLS ICE & WATER DISPLAY REQUIRED TOOLS Cross-head screwdriver Cutter FPA spanner (1x) Water filter (1x) Measuring tape External display module (1x)…

4. Door panel setsp. 7

   DOOR HANDLE SETS Non-Water dispensing door panel set (RD80/RD90) Supplied and must be purchased separately through an authorised Fisher and Paykel dealer.…

5. Door handle setsp. 7

   Non-Water dispensing door panel set (RD80/RD90) Supplied and must be purchased separately through an authorised Fisher and Paykel dealer. Visit…

6. Product dimensionsp. 8

   RS80 RS90 PRODUCT DIMENSIONS MM MM A Overall height of appliance* 1798** 1798** B Overall width of appliance 796 896 C Overall depth of appliance (excluding…

7. Cabinetry dimensionsp. 9

   A b c e d d e ISOMETRIC PLAN 9 UNFRAMED Aligns the appliance with the cabinetry FRAMED Aligns the appliance with the frame of cabinetry

8. Door and toe kick panel dimensionsp. 10

   Custom door panels can only be used for non-Water dispensing models. A b c d e g f RS80 RS90 DOOR PANEL DIMENSIONS MM MM A Height of top door panel 1096 1096 B…

9. Custom door panel installation dimensions — RS80p. 11

   Dimensions apply for the preparation and installation of custom door panels. For Dwg and Dxf files of the below panel preparation download the folder on…

10. Custom door panel installation dimensions — RS90p. 13
11. Custom door panel installation templatep. 15

    LEFT DOOR PANEL SIDE RIGHT DOOR PANEL SIDE This template is a single double-sided sheet used as a guide to drill screw holes for installing your Custom door…

12. Door clearancep. 16
13. Electrical and plumbingp. 17

    CONNECTIONS 1 Recommended location for connections in adjacent area or unit 2 Alternative location for connections above the cavity 3 Alternative location for…

14. Before installationp. 19

    z Your appliance is fitted with front and rear rollers designed for moving the appliance forward and backward. Do not move the appliance sideways as this may…

15. Cavity preparationp. 21

    Anti tip bracket kit Anti-tip bracket (1x) Masonry plug (4x) #10x40 cross-head screw (4x) Tools Cross-head screwdriver Powered driver (optional) Pencil z The…

16. Water and power supply connectionp. 22

    2 3 Connect the water tap adaptor to a water tap. Flush water through the hose prior to connection to the appliance to remove any debris in the hose. Connect…

17. Installation preparationp. 24

    Pull cap gently towards the left hinge to remove. Keep the end hinge cap to reinstall later. 24

18. Aligning into cabinetryp. 25

    z Your appliance has front and rear rollers to move easily forward and backward. z Avoid moving the appliance in a sideways direction as this may damage the…

19. Door panel installation — stainless steelp. 26

    A z Follow these steps to avoid difficulties in door panel adjustment and cosmetic cap fitment. z Ensure to protect the finish of the Stainless steel door…

20. Door panel installation — customp. 30
21. Fixing to cabinetryp. 36

    Secure the hinge bracket to cabinetry Secure the hinge bracket to the ceiling of the cabinetry with #8Gx19 twin thread screw. Repeat on the opposite side.…

22. Water filter installationp. 37
23. Toe kick installationp. 38
24. Covers and trims installationp. 39
25. Final checklistp. 40

    TO BE COMPLETED BY THE INSTALLER All models Ensure all internal and external packaging is removed from the appliance before use. Check all parts are…