Fisher & Paykel INDUCTION COOKTOPS (CI905CTB2) installation instructions

Contents

1. Safety and warningsp. 3
2. Components requiredp. 7

   TOOLS Not supplied F Box cutter F Phillips screwdriver F Level PARTS Supplied and required F 4 x Retaining brackets F 4 x Bracket screws F Foam tape (attached)

3. Product specifications CI905 modelsp. 8

   PRODUCT DIMENSIONS Product Dimensions mm A Overall width of cooktop 900 B Overall depth of cooktop 530 C Overall height of cooktop 61 D Height of chassis 57…

4. Product specifications CI604 modelsp. 9
5. Product specifications CI302 modelsp. 10
6. Clearancesp. 11

   Ensure all minimum specifications have been met and clearances have been considered. B A CLEARANCE DIMENSIONS MM A Minimum clearance from glass surface to…

7. Ventilationp. 12

   DIMENSIONS MM A Minimum ventilation gap at the rear of the cooktop 20 B Minimum ventilation gap at the front of the cooktop 5 C Minimum ventilation under the…

8. Electrical specificationsp. 13

   Connecting the cooktop to the mains power supply IMPORTANT! z This cooktop must be connected to the mains power supply only by a suitably qualified person. z…

9. Installationp. 15

   1. Turn the cooktop upside down on a protective cover. Do not remove the foam seal under the edge of the glass top. 2. Fix the four supplied retaining brackets…

10. Installer checklistp. 17

    GENERAL ELECTRICAL Read safety and warnings in the user guide before operating the cooktop. Specified clearance maintained. Unit is level – front to back and…

Other documents for this model

• Fisher & Paykel STANDARD CURRENT (CI905CTB2) user manual