Loading manual…
Fisher & Paykel FRENCH DOOR REFRIGERATOR FREEZER (RS32A72) installation instructions
- Type
- Installation instructions
- Language
- English
- Pages
- 46
- Category
- Refrigerators & freezers
- Models
- RS32A72RS36A72
Open PDFOpens the file on fisherpaykel.com.
Contents
- 1 Safety and warningsp. 5
! WARNING! Electric Shock Hazard Read and follow the safety and warnings outlined in this installation guide before operating this appliance. Failure to do so…
- 2 Componentsp. 6
Internal box (Installation kit) Located inside appliance A Anti-tip bracket assembly kit Anti-tip bracket (1) Masonry plug (4) #10x40 cross-head screw (4) B…
- 3 Toolsp. 8
Door handle kit Not supplied and must be purchased separately. Select between the options below: Professional rounded door handle (3x) Professional square door…
- 4 Appliance and cavity dimensionsp. 9
- 5 Cabinetry optionsp. 10
- 6 Door panel dimensionsp. 11
IMPORTANT! • Custom door panels can only be used for non-Water dispensing models. • Custom door panels to be manufactured and fitted by cabinetmaker. • Door…
- 7 Custom door panel installation dimensions — RS32A72p. 12
Dimensions apply for the preparation and installation of custom door panels. For Dwg and Dxf files of the below panel preparation download the folder on…
- 7 Custom door panel installation dimensions — RS36A72p. 13
- 8 Custom door panel installation template (RS32A72)p. 14
LEFT DOOR PANEL SIDE RIGHT DOOR PANEL SIDE This template is a single double-sided sheet used as a guide to drill screw holes for installing your Custom door…
- 8 Custom door panel installation template (RS36A72)p. 15
- 9 Door clearancep. 16
- 10 Electrical and plumbingp. 17
! IMPORTANT! • Electrical connection should be located in an adjacent cabinet to either side of the appliance or above the appliance cavity. • We recommend to…
- 11 Before installationp. 19
4 Restrain the appliance to the cart with straps. 5 Remove the brackets on the other side of the appliance. 6 Tilt the appliance backward onto the cart. 7 Set…
- 12 Cavity preparationp. 21
!2 CAVITY PREPARATION Internal box A Anti tip bracket kit Anti-tip bracket (1) Masonry plug (4) #10x40 cross-head screw (4) Tools Cross-head screwdriver…
- 13 Water supply connectionp. 22
IMPORTANT! • The water connection instructions below are intended only for the professional installer. • The appliance comes with a pre-connected plastic water…
- 14 Power supply connectionp. 23
Connect to power supply 1 Locate the power cord and connect the fitted plug to the electrical supply (115 V, 60 Hz). Turn ON the appliance. – We recommend to…
- 15 Installation preparationp. 24
WARNING! • Be careful when working with the appliance outside of the finished enclosure. • Ensure that the appliance is secured to prevent tipping forward.…
- 16 Top trim installationp. 25
3 Fix the top trim by screwing #12x12 countersunk screws (D) through the screw holes of the top trim and hinge brackets. Internal box X Install fasteners kit…
- 17 Positioning into cabinetryp. 26
!7 POSITIONING INTO CABINETRY Position the appliance into the cabinetry 1 Ensure the power cord are secured to the clip at the back of the appliance (A) and…
- 18 Aligning inside cabinetryp. 27
Align appliance inside the cabinetry 1 Centre the appliance within the alcove, using the adjacent walls as a guide. 2 Raise the front of the appliance until…
- 19 Door panel installation — stainless steelp. 28
IMPORTANT! • Follow these steps to avoid difficulties in door panel adjustment and cosmetic cap fitment. • Ensure to protect the finish of the Stainless steel…
- 20 Door panel installation — customp. 32
back side of door panel front side of door panel IMPORTANT! • The template is a single sheet with one side used for the left door panel / drawer panel and the…
- 21 Fixing to cabinetryp. 38
Internal box X Install fasteners kit #8Gx16 flat head screw (2) Tools Cross-head screwdriver Powered driver (optional) Secure the top trim to cabinetry 1…
- 22 Water filter installationp. 39
IMPORTANT! • The water filter head must be firmly pushed into the appliance and secured. incorrect installation can lead to water leaks. 4 Align the filter…
- 23 Toe kick installationp. 40
B A Install the toe kick filter and grille 1 Fit the filter onto the rails and push until it clips securely (A). 2 Align the top grille clips to the top plinth…
- 24 Covers and trims installationp. 41
Attach the covers 1 Open the French doors. Attach the top covers (A) firmly over the top studs, and the side covers (B) to the side brackets. Attach the door…
- 25 Cabinet trims installation — [A] flexible spring clip methodp. 42
@5 CABINET TRIMS INSTALLATION — [A] FLEXIBLE SPRING CLIP METHOD 2 Place 3 side trim brackets onto each side trim. Note: Measure from the top of the trim, with…
- 26 Cabinet trims installation — [B] fixed screw methodp. 44
Internal box D Cabinet side trim install kit Side trim bracket (6) Spring clip (6) #8x16 mush washer screw (12) External box Cabinet side trim (2) 0 Front of…
- 27 Final checklistp. 46
FISHERPAYKEL.COM © Fisher & Paykel Appliances 2019. All rights reserved. The appliance specifications in this document apply to the specific appliances and…