Garmin Force Pro Trolling Motor Stabilizer installation instructions

Contents

1. Getting Startedp. 1

   WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. CAUTION To avoid…

2. Tools Neededp. 1

   9/16 in. (14 mm) wrench or socket • 3/16 in. hex bit or wrench • Torque wrench • Hacksaw or similar cutting tool to trim the length of the stabilizer (optional)

3. Installation Proceduresp. 1

   NOTICE When assembling the motor, you must use hand tools to install all of the parts, observing the torque specifications when provided. Using power tools to…

4. Attaching the Bracketp. 2

   Transition the motor into the stowed position. 2 With the folded portion of the bracket facing the steering system housing , place the bracket on either the…

5. Installing the Stabilizer Rodp. 3

   Place the stabilizer rod into the bracket. 2 Place the bumper cap onto the lower end of the rod. NOTE: Two caps are included with the stabilizer. The notched…

6. Trimming the Stabilizer Rodp. 4

   Before you trim the stabilizer rod, you must install the rod and test the installation for clearance and proper support. Trimming the height of the stabilizer…