Loading manual…
Garmin BlueNet 30 Gateway installation instructions
- Type
- Installation instructions
- Language
- English
- Pages
- 10
- Category
- GPS & navigation
- Models
- BlueNet 30 Gateway
Open PDFOpens the file on static.garmin.com.
Contents
- Important Safety Informationp. 1
WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Failure to install this…
- Garmin BlueNet 30 Gateway Overviewp. 1
The Garmin BlueNet 30 gateway allows you to connect legacy Garmin ® Marine Network devices to a Garmin BlueNet chartplotter or network. When installing this…
- Mounting Considerationsp. 2
NOTICE This device should be mounted in a location that is not exposed to extreme temperatures or conditions. The temperature range for this device is listed…
- Mounting the Devicep. 2
NOTICE If you are mounting the device in fiberglass, when drilling the pilot holes, use a countersink bit to drill a clearance counterbore through only the top…
- Connection Considerationsp. 2
When connecting the Garmin BlueNet 30 gateway to power and to other Garmin devices, you should observe these considerations. NOTICE Only one Garmin BlueNet 30…
- Device and Port Overviewp. 3
Item Description Notes Power button The power button is provided for troubleshooting purposes. The device turns on automatically when it receives power. Power…
- Connecting to Powerp. 3
WARNING When connecting the power cable, do not remove the in-line fuse holder. To prevent the possibility of injury or product damage caused by fire or…
- Additional Grounding Considerationp. 3
, page 3). Connecting to Power WARNING When connecting the power cable, do not remove the in-line fuse holder. To prevent the possibility of injury or product…
- Garmin BlueNet Network Construction Examplep. 4
Creating a Garmin BlueNet network containing legacy Garmin Marine Network devices may be confusing, and it is critical that the network is constructed…
- Specificationsp. 7
- Status LEDsp. 8
STATUS LED LED Activity Status Flashing green The device is operating normally. Flashing orange The device software is being updated. Solid red The device is…
- 联系信息p. 8
- 連絡地址p. 8
- 物質宣言p. 9