Garmin AIS 800 installation instructions

Contents

1. Important Safety Informationp. 1

   WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. CAUTION To avoid…

2. FCC Compliancep. 1

   NOTICE In the USA, it is prohibited under FCC regulations to enter incorrect or improper data, and it is prohibited for any person other than the manufacturer…

3. Assigning Data to the Devicep. 1

   WARNING When programmed with a valid MMSI number, this device allows you to transmit AIS signals with vessel position data. This device is meant to enhance…

4. Tools Neededp. 2

   Drill • Drill bits appropriate for the surface and hardware • Phillips screwdriver • Pencil 2

5. Mounting Considerationsp. 3

   NOTICE This device should be mounted in a location that is not exposed to extreme temperatures or conditions. The temperature range for this device is listed…

6. VHF Antenna Mounting and EME Exposurep. 3

   WARNING Radio operators with cardiac pacemakers, life-support machines, or electrical medical equipment should not be exposed to excessive radio-frequency (RF)…

7. Mounting the Devicep. 3

   NOTICE If you are mounting the device in fiberglass, when drilling the pilot holes, use a countersink bit to drill a clearance counterbore through only the top…

8. Connection Considerationsp. 4

   Device Ports Item Description USB port1 NMEA 2000 ® Power and NMEA ® 0183 AIS antenna (required, not included) VHF radio (optional) External GPS antenna…

9. Device Portsp. 4

   Item Description USB port1 NMEA 2000 ® Power and NMEA ® 0183 AIS antenna (required, not included) VHF radio (optional) External GPS antenna (optional)2 1 Used…

10. Connecting the Device to Powerp. 5
11. Connecting an AIS Antennap. 6

    To transmit and receive signals, you must connect an external AIS antenna (not included) to the Garmin AIS 800 device. For the best performance, you should use…

12. NMEA 2000 Connectionsp. 6

    NOTICE If you are installing a NMEA 2000 power cable, you must connect it to the boat ignition switch or through another in-line switch. NMEA 2000 devices will…

13. NMEA 0183 Device Connectionsp. 8

    This diagram illustrates two-way connections for both sending and receiving data. You can also use this diagram for one-way communication. To receive…

14. Status LEDsp. 9

    LED State Description VHF TX Solid A connected VHF radio is transmitting. Error Solid The device has encountered a critical error. You can connect the device…

15. Connecting the Device to a Remote GPS Antennap. 10

    This device must receive GPS information for proper functionality. The device includes an internal GPS antenna. If your mounting location does not provide good…

16. Appendixp. 10

    Specifications Dimensions (W x H x D) 175 x 142.3 x 54.5 mm (6.9 x 5.6 x 2.1 in.) Weight 414 g (0 .9 lbs.) Operating temperature range From -15° to 55°C (from…

17. Specificationsp. 10

    Dimensions (W x H x D) 175 x 142.3 x 54.5 mm (6.9 x 5.6 x 2.1 in.) Weight 414 g (0 .9 lbs.) Operating temperature range From -15° to 55°C (from 5° to 131°F)…

18. NMEA 2000 PGN Informationp. 11

    Transmit PGN Description 059392 ISO acknowledgment 060928 ISO address claim 126208 NMEA: Command, request, acknowledge group function 126464 PGN list 126992…

19. NMEA 0183 Sentences Supportedp. 12

    Sentence Definition ACA AIS Regional Channel Assignment Message ALR Set alarm state GGA Global positioning system fix data RMC Recommended minimum specific…

20. Testing for Interference from LED Lightsp. 12

    LED lighting from sources such as navigation lights, searchlights, floodlights, interior and exterior lights, and adornments can interfere with your Garmin AIS…

21. 物質宣言p. 13
22. 联系信息p. 13