Loading manual…
LG PU600U user manual
- Type
- User manual
- Language
- English
- Pages
- 54
- Category
- Projectors
- Models
- PU600U
Open PDFOpens the file on gscs-b2c.lge.com.
Contents
- READ BEFORE USEp. 3
This product includes both a printed and an electronic user manual. All steps for purchasing and installing the product can be found in the printed user…
- INSTALLATIONp. 9
How to use the edge guards It prevents any damage to the product and injury when being attached to sharp edges of the product. 1 2 3
- How to use the edge guardsp. 9
It prevents any damage to the product and injury when being attached to sharp edges of the product. 1 2 3
- Projection Distance per Screen Sizep. 10
Place the projector on a sturdy, level surface, together with the PC or audio/ video source. 2 Place the projector an appropriate distance away from the…
- Adjusting the Position of the Projection Screenp. 12
Adjust the angle of the projector to adjust the screen position. • To adjust the angle of the projector, turn the handle to use it. • When adjusting the angle…
- Adjusting the Angle and Focus of the Projection Screenp. 13
Be careful not to shake the product. Automatically adjusts the angle and focus of the projection screen of the projector. (Q. Settings) → [ ] → [General] →…
- Kensington Security Systemp. 14
This projector has a Kensington Security Standard connector as an anti-theft mechanism. Connect a Kensington Security System cable as shown below. • For more…
- USING REMOTE CONTROLp. 15
Replacing the Remote Control Battery Use 3 V, CR2025 button cell battery. Replace the battery with new one and insert it in the battery tray as shown. 1 To…
- Replacing the Remote Control Batteryp. 15
Use 3 V, CR2025 button cell battery. Replace the battery with new one and insert it in the battery tray as shown. 1 To separate the battery tray on the back of…
- Viewing the Remote Control Featuresp. 16
Some buttons and services may not be provided depending upon models or regions. (Power) Turns the Projector on or off. (Input) Changes the input source.…
- CONNECTING DEVICESp. 18
You can connect various external devices to the projector
- Connecting with a HDMI Cablep. 18
Connect an HD receiver, DVD, PC, Notebook, or external devices to the projector and select an appropriate input mode. With an HDMI cable, you can enjoy high…
- Connecting with a USB-C Cablep. 20
Connect the USB-C terminal of the projector to the USB-C output terminal of a PC/ laptop or smartphone using a USB-C cable. If the USB device is not recognized…
- SAFETY PRECAUTIONSp. 23
Please take note of the safety instructions to prevent any potential accident or misuse of the projector. Child injuries can be prevented by following these…
- CHECKING BEFORE REPORTING MALFUNCTIONp. 36
Please check the list below when you experience the following symptoms during use of the product. It may not be a failure
- Projector Safety Checkp. 36
Symptoms • The projector does not display anything on the screen or output sound when it is turned on. • The product emits smoke or a burning smell. • Water or…
- Troubleshootingp. 37
Symptoms Causes and Solutions I cannot turn on the Projector. • Please make sure your projector power plug is correctly connected to the outlet. • There may be…
- CHECKING INFORMATIONp. 39
Specifications MODEL PU600U PU600U-GL Resolution (Pixel) 3840 (Horizontal) x 2160 (Vertical) 1) Aspect ratio 16:9 (Horizontal:Vertical) Projection distance — —…
- Specificationsp. 39
MODEL PU600U PU600U-GL Resolution (Pixel) 3840 (Horizontal) x 2160 (Vertical) 1) Aspect ratio 16:9 (Horizontal:Vertical) Projection distance — — Screen size…
- Licensesp. 41
Supported licenses may differ by model. For more information about licenses, visit www.lg.com. The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI…
- Open Source Software Notice Informationp. 42
To obtain the source code that is contained in this product, under GPL, LGPL, MPL, and other open source licenses that have the obligation to disclose source…
- Other specificationsp. 43
This label is attached to the bottom of the product and language may differ. As with any bright light source, do not stare into the beam, RG2 IEC 62471-…
- Symbolsp. 44
Refers to alternating current (AC). Refers to direct current (DC). Refers to class II equipment. Refers to stand-by. Refers to “ON” (power). Refers to…
- LIMITED WARRANTY (USA)p. 45
- LIMITED WARRANTY (CANADA)p. 49