TP-Link TL-WR841ND V10.0 user manual

Contents

1. Chapter 1. Introductionp. 10

   1.1 Overview of the Router The TL-WR841N/TL-WR841ND 300Mbps Wireless N Router integrates 4-port Switch, Firewall, NAT-Router and Wireless AP. The 300Mbps…

2. Chapter 2. Connecting the Routerp. 15

   2.1 System Requirements  Broadband Internet Access Service (DSL/Cable/Ethernet)  One DSL/Cable Modem that has an RJ45 connector (which is not necessary if…

3. Chapter 3. Quick Installation Guidep. 18

   This chapter will show you how to configure the basic functions of your TL-WR841ND 300Mbps Wireless N Router using Quick Setup Wizard within minutes. 3.1…

4. Chapter 4. Configuring the Routerp. 28

   This chapter will show each Web page's key functions and the configuration way. 4.1 Login After your successful login, you will see the sixteen main menus on…

5. Appendix A: FAQp. 101

   1. How do I configure the router to access Internet by ADSL users? 1) First, configure the ADSL Modem configured in RFC1483 bridge model. 2) Connect the…

6. Appendix B: Configuring the PCp. 106

   In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows 7. First make sure your Ethernet Adapter is working, refer to the…

7. Appendix C: Specificationsp. 110

   General Standards IEEE 802.3, 802.3u, 802.11b, 802.11g and 802.11n Protocols TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP Ports One 10/100M Auto-Negotiation WAN RJ45…

8. Appendix D: Glossaryp. 111

    802.11n - 802.11n builds upon previous 802.11 standards by adding MIMO (multiple-input multiple-output). MIMO uses multiple transmitter and receiver antennas…