Loading manual…
LG 43UN700 user manual
- Type
- User manual
- Language
- English
- Pages
- 38
- Category
- Monitors
- Models
- 43UN700
Open PDFOpens the file on gscs-b2c.lge.com.
Contents
- LICENSEp. 3
Each model has different licenses. Visit www.lg.com for more information on the license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the…
- ASSEMBLING AND PREPARINGp. 4
y y Always use genuine LG components to ensure safety and product performance. y y The product warranty will not cover damage or injury caused by the use of…
- Supported Drivers and Softwarep. 4
You can download and install the latest version from the LGE website (www.lg.com). Drivers and Software Installation Priority Monitor Driver Recommended On…
- Component and Button Descriptionp. 5
Power LED y y On: power is on y y Off: power is off Joystick Button yy The joystick button is located at the bottom of the monitor. NOTE y y IR Receiver
- Moving and Lifting the Monitorp. 6
When moving or lifting the monitor, follow these in structions to prevent the monitor from being scratched or damaged and to ensure safe transportation…
- REMOTE CONTROLp. 12
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install…
- USING THE MONITORp. 13
Connecting to a PC y y This monitor supports the *Plug and Play feature. *Plug and Play: A feature that allows you to add a device to your computer without…
- Connecting to a PCp. 13
y y This monitor supports the *Plug and Play feature. *Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure…
- Connecting to AV Devicesp. 14
HDMI connection Transmits the digital video and audio signals from your PC and A/V devices to the monitor. Connect your PC and AV device to the monitor with…
- Connecting Peripheralsp. 15
USB Cable connection - PC The USB port on the product functions as a USB hub. Please connect the USB C-C cable to the PC. NOTE CAUTION y y Make sure to install…
- Connecting to External Devicesp. 16
Connecting Headphones Connect peripherals to the monitor via the headphones port. Connect as illustrated. yy Peripheral devices are sold separately. yy If you…
- User Settingsp. 17
NOTE y y Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual. y y When Beep Guide is activated, pressing the joystick…
- Activating the Main Menup. 17
Press the joystick button on the bottom of the monitor. 2 Move the joystick up/down (▲/▼) and left/right(◄/►) to set the options. 3 Press the joystick button…
- User Settingsp. 18
Menu Settings 1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Settings. 2 Configure the options by moving the…
- TROUBLESHOOTINGp. 24
Nothing is displayed on the screen. Is the monitor's power cord plugged in? y y Check if the power cord is correctly plugged into the power outlet. Is the…
- Factory Support Mode (Preset Mode, PC)p. 28
- HDMIp. 28
Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) Remarks 640 x 480 31.469 59.94 -/- 800 x 600 37.879 60.317 +/+ 1024 x…
- DisplayPort / USB-Cp. 28
- HDMI Timing (Video)p. 29
Factory support mode (Preset Mode) Horizontal Frequency(kHz) Vertical Frequency(Hz) Remarks 480p 31.5 60 720p 45.0 60 1080p 67.5 60 2160p 135 60 When HDMI…
- Power LEDp. 29
Mode LED Color On Mode White (For a few seconds) Sleep Mode (Standby Mode) Off Off Mode Off
- EXTERNAL CONTROL DEVICE SETUPp. 30
Communication Parameters Baud rate : 9600 bps (UART) Data length : 8 bits Parity : None Stop bit : 1 bit Communication code : ASCII code Use a crossed…
- Communication Parametersp. 30
Baud rate : 9600 bps (UART) Data length : 8 bits Parity : None Stop bit : 1 bit Communication code : ASCII code Use a crossed (reverse) cable. Transmission…
- Beep Guidep. 33
ENG ENGLISH Beep Guide Menu Location Quick Settings 1 Quick Settings - Brightness 1 1 Quick Settings - Brightness 1 1 1 Slider Quick Settings - Contrast 1 2…