MSI Modern MD272QP 27 Inch Monitor user manual

Contents

1. Getting Startedp. 3

   This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded…

2. Installing the Monitor Standp. 4

   1. Leave the monitor in its protective foam packaging. Align the stand bracket to the monitor groove. 2. Tighten the stand bracket with screws. 3. Connect the…

3. Adjusting the Monitorp. 5

   This monitor is designed to maximize your viewing comfort with its adjustment capabilities. ⚠ ⚠Important •Avoid touching the display panel when adjusting the…

4. Monitor Overviewp. 6
5. Connecting the Monitor to PCp. 8

   1. Turn off your computer. 2. Connect the video cable from the monitor to your computer. 3. Assemble the external power supply & power cord. (Figure A) 4.…

6. OSD Setupp. 9

   This chapter provides you with essential information on OSD Setup. ⚠ ⚠Important All information is subject to change without prior notice

7. OSD Keysp. 9

   The monitor comes with a set of OSD Keys that help to control the On-Screen Display (OSD) menu. OSD Key Hot Key (When OSD is OFF) OSD Setup (When OSD is ON) M…

8. OSD Menusp. 10

   Modern MD272P/ Modern MD272PW Modern MD272QP/ Modern MD272QPW/ Modern MD272QP Ultramarine ⚠ ⚠Important When receiving HDR signals, Low Blue Light, HDCR…

9. Professionalp. 11

   1st Level Menu 2nd/3rd Level Menu Description Mode Eco •Use Up or Down Button to select and preview mode effects. •Press the E Button to confirm and apply your…

10. Imagep. 13

    1st Level Menu 2nd/3rd Level Menu Description Brightness 0-100 •Properly adjust Brightness according to the surrounding lighting. •Brightness will be grayed…

11. Input Sourcep. 14

    1st Level Menu 2nd Level Menu Description HDMI •Select an Input Source from the list. DP Type C Auto Scan OFF •Users can use the

12. Navi Keyp. 14

    to select Input Source at below status: • While “Auto Scan” is set to “OFF” with the monitor at power saving mode; • While “No Signal” message box is shown on…

13. Settingp. 15

    1st Level Menu 2nd Level Menu Description Language 繁體中文 •Users have to press the E Button to confirm and apply the Language setting. •Language is an…

14. Specificationsp. 17

    Model Modern MD272P Modern MD272PW Modern MD272QP Modern MD272QPW Modern MD272QP Ultramarine Size 27 inch Curvature Flat Panel Type IPS Resolution 1920 x 1080…

15. Preset Display Modesp. 19

    ⚠ ⚠Important All information is subject to change without prior notice. Standard Resolution Modern MD272P Modern MD272PW Modern MD272QP Modern MD272QPW Modern…

16. Troubleshootingp. 20

    The power LED is off. • Press the monitor power button again. • Check if the monitor power cable is properly connected. No image. • Check if the computer…

17. Safety Instructionsp. 21

    Read the safety instructions carefully and thoroughly. •All cautions and warnings on the device or User Guide should be noted. •Refer servicing to qualified…

18. TÜV Rheinland Certificationp. 23

    TÜV Rheinland Low Blue Light Certification Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue…

19. Regulatory Noticesp. 24

    CE Conformity This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to…

Other documents for this model

• MSI Modern MD272P 27 Inch Monitor user manual