MSI MP275Q (PRO MP275Q) user manual

Contents

1. Getting Startedp. 3

   This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded…

2. Installing the Monitor Standp. 4

   ⚠Important •Place the monitor on a soft, protected surface to avoid scratching the display panel. •Do not use any sharp objects on the panel. •This product…

3. Adjusting the Monitorp. 6

   This monitor is designed to maximize your viewing comfort with its adjustment capabilities. ⚠Important •Avoid touching the display panel when adjusting the…

4. Monitor Overviewp. 8
5. Connecting the Monitor to PCp. 11

   1. Turn off your computer. 2. Connect the video cable from the monitor to your computer. 3. Connect the power cord to the monitor power jack. (Figure A) 4.…

6. OSD Setupp. 12

   This chapter provides you with essential information on OSD Setup. ⚠Important All information is subject to change without prior notice

7. Navi Keyp. 12

   The monitor comes with a Navi Key, a multi-directional control that helps navigate the On-Screen Display (OSD) menu. Up/ Down/ Left/ Right: •selecting function…

8. Hot Keyp. 12

   Users may enter into preset function menus by moving the Navi Key up, down, left or right when the OSD menu is inactive. •Users may customize their own Hot…

9. OSD Menusp. 13

   Professional 1st Level Menu 2nd/3rd Level Menu Description Mode Eco •Use Up or Down Button to select and preview mode effects. •Press the Middle Button to…

10. Professionalp. 13

    1st Level Menu 2nd/3rd Level Menu Description Mode Eco •Use Up or Down Button to select and preview mode effects. •Press the Middle Button to confirm and apply…

11. Imagep. 15

    1st Level Menu 2nd/3rd Level Menu Description Brightness 0-100 •Properly adjust Brightness according to the surrounding lighting. Contrast 0-100 •Properly…

12. Input Sourcep. 16

    s. Clock 0-100 •Adjust Clock setting. •For D-Sub only, this setting will be grayed out when detecting other input sources. Phase 0-100 •Adjust Phase setting.…

13. Navi Keyp. 16

    to select Input Source at below status: • While “Auto Scan” is set to “OFF” with the monitor at power saving mode; • While “No Signal” message box is shown on…

14. Settingp. 17

    1st Level Menu 2nd Level Menu Description Language 繁體中文 •Users have to press the Middle Button to confirm and apply the Language setting. •Language is an…

15. Specificationsp. 18

    Monitor PRO MP275 PRO MP275P Size 27 inch Curvature Flat Panel Type IPS Resolution 1920x1080 (FHD) Aspect Ratio 16:9 SDR Brightness (nits) 300 Contrast Ratio…

16. Preset Display Modesp. 20

    ⚠Important All information is subject to change without prior notice. Standard Resolution HDMI™ D-Sub VGA 640x480 @60Hz V V @67Hz V V @72Hz V V @75Hz V V…

17. Troubleshootingp. 21

    The power LED is off. • Press the monitor power button again. • Check if the monitor power cable is properly connected. No image. • Check if the computer…

18. Safety Instructionsp. 22

    Read the safety instructions carefully and thoroughly. •All cautions and warnings on the device or User Guide should be noted. •Refer servicing to qualified…

19. TÜV Rheinland Certificationp. 24

    TÜV Rheinland Low Blue Light Certification Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue…

20. ENERGY STAR Certificationp. 24

    ENERGY STAR is a program run by the U.S. Environmental Protection Agency (EPA) and U.S. Department of Energy (DOE) to promote energy efficiency. This product…

21. Regulatory Noticesp. 25

    CE Conformity This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to…