Gigabyte B660M GAMING DDR4 user manual

Contents

1. Preparing the Hard Drives and BIOS Settingsp. 2

   A. Installing hard drives Install the SATA hard drives or SSDs in the Intel® Chipset controlled connectors on the motherboard. Then connect the power…

2. A. Installing hard drivesp. 2

   Install the SATA hard drives or SSDs in the Intel® Chipset controlled connectors on the motherboard. Then connect the power connectors from your power supply…

3. B. Configuring the BIOS settingsp. 3

   Step 1: Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-Test). Go to Settings\IO Ports\SATA And RST Configuration…

4. C. Configuring a RAID Arrayp. 3

   Step 1: After the system reboot, enter BIOS Setup again. Then enter the Settings\IO Ports\Intel(R) Rapid Storage Technology sub-menu (Figure 2). Figure 2

5. Installing the RAID Driver and Operating Systemp. 7

   With the correct BIOS settings, you are ready to install the operating system. If you want to install an operating system on a RAID volume, you need to install…

6. Installing Intel® Optane™ Memory and Storage Managementp. 8

   A. Enabling an Intel® Optane™ Memory A-1. System Requirements 1. Intel® Optane™ memory H10/H20. 2. System acceleration with Intel® Optane™ Memory can only be…

7. A. Enabling an Intel® Optane™ Memoryp. 8

   A-1. System Requirements 1. Intel® Optane™ memory H10/H20. 2. System acceleration with Intel® Optane™ Memory can only be enabled on the M.2 connectors…

8. B. Rebuilding an Arrayp. 9

   Rebuilding is the process of restoring data to a hard drive from other drives in the array. Rebuilding applies only to fault-tolerant arrays such as RAID 1…